Inset Bypass Sliding Door Hardware

Containing all the hardware needed to install a two-panel set of sliding doors, this kit includes 78" top and bottom tracks, two sets of top and bottom rollers for hanging the door panels, plus doorstops and soft-closing mechanisms.

The top rollers have ball bearings and soft thermoplastic treads to ensure smooth, quiet operation. The soft-closing mechanisms prevent slamming, gently pulling the doors closed in the last few inches of travel. The aluminum tracks mount on the inside of a closet or armoire frame and can be cut to length.

Suitable for door panels up to 100cm (39 3/8") wide, from 16mm (5/8") to 23mm (7/8") thick, and weighing up to 30kg (66 lb).