Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Both sizes of hinge pins and springs sitting on a box lid
05H0201 - 1/8" Hinge Pin Set
05H0204 - 1/4" Hinge Pin Set
Close-up of corner of box lid with hidden hinge installed
Installing a hinge pin in a box lid
Pushing back the installed hinge pin with a narrow tool through a groove in the lid to remove the box lid
Small wooden box with lid open
Both sizes of hinge pins and springs sitting on a box lid
05H0201 - 1/8" Hinge Pin Set
05H0204 - 1/4" Hinge Pin Set
Close-up of corner of box lid with hidden hinge installed
Installing a hinge pin in a box lid
Pushing back the installed hinge pin with a narrow tool through a groove in the lid to remove the box lid
Small wooden box with lid open

Lee Valley Hidden Hinge PinsMade in Canada

This item is not available for this region.

Not only are these pin hinges sturdy and nearly invisible when in place, they are quick to install. Supplied as a set of two stainless-steel pins and two springs, they work much like spring bolts when fitted into holes you drill in the box lid and sides.

The springs let you fully recess the pins in the lid during assembly. Then, once the pins are aligned with the receiving holes in the box sides, they simply pop into place, creating a strong hidden pivot.

The pins also let you remove the lid; if a narrow slot is cut through the lid to the side of the pin recess, a groove on the pin can be used to pull the pin back, freeing the lid for removal.

Available with 1/8" diameter pins for stock thicknesses up to 5/8" or 1/4" diameter pins for stock 5/8" thick and up.

Made in Canada.

Both sizes of hinge pins and springs sitting on a box lid

Options:

Diameter

Variations:

    Lee Valley Hidden Hinge Pins

    Not only are these pin hinges sturdy and nearly invisible when in place, they are quick to install. Supplied as a set of two stainless-steel pins and two springs, they work much like spring bolts when fitted into holes you drill in the box lid and sides.

    The springs let you fully recess the pins in the lid during assembly. Then, once the pins are aligned with the receiving holes in the box sides, they simply pop into place, creating a strong hidden pivot.

    The pins also let you remove the lid; if a narrow slot is cut through the lid to the side of the pin recess, a groove on the pin can be used to pull the pin back, freeing the lid for removal.

    Available with 1/8" diameter pins for stock thicknesses up to 5/8" or 1/4" diameter pins for stock 5/8" thick and up.

    Made in Canada.

    Related Products

    07J0205 - 5/64" HSS Brad-Point
    07J0206 - 3/32" HSS Brad-Point
    07J0207 - 7/64" HSS Brad-Point
    07J0208 - 1/8" HSS Brad-Point
    07J0209 - 9/64" HSS Brad-Point
    07J0210 - 5/32" HSS Brad-Point
    07J0211 - 11/64" HSS Brad-Point
    07J0212 - 3/16" HSS Brad-Point
    07J0213 - 13/64" HSS Brad-Point
    07J0214 - 7/32" HSS Brad-Point
    07J0215 - 15/64" HSS Brad-Point
    07J0216 - 1/4" HSS Brad-Point
    07J0217 - 17/64" (6.75mm) HSS Brad-Point
    07J0218 - 9/32" HSS Brad-Point
    07J0219 - 19/64" HSS Brad-Point
    07J0220 - 5/16" HSS Brad-Point
    07J0221 - 21/64" HSS Brad-Point
    07J0222 - 11/32" HSS Brad-Point
    07J0223 - 23/64" HSS Brad-Point
    07J0224 - 3/8" HSS Brad-Point
    07J0225 - 25/64" HSS Brad-Point
    07J0226 - 13/32" HSS Brad-Point
    07J0227 - 27/64" HSS Brad-Point
    07J0228 - 7/16" HSS Brad-Point
    07J0229 - 29/64" HSS Brad-Point
    07J0230 - 15/32" HSS Brad-Point
    07J0231 - 31/64" HSS Brad-Point
    07J0232 - 1/2" HSS Brad-Point
    07J0233 - 33/64" HSS Brad-Point
    07J0235 - 35/64" HSS Brad-Point
    07J0236 - 9/16" HSS Brad-Point
    07J0240 - 5/8" HSS Brad-Point
    07J0244 - 11/16" HSS Brad-Point
    07J0248 - 3/4" HSS Brad-Point
    07J0252 - 13/16" HSS Brad-Point
    07J0256 - 7/8" HSS Brad-Point
    07J0260 - 15/16" HSS Brad-Point
    07J0264 - 1" HSS Brad-Point
    Illustration comparing Lee Valley bits to regular bits
    HSS Lipped Imperial Brad-Point Drills
    Product Information