All color-controlled LED tape lighting requires a color controller to blend the red, green and blue LEDs into a custom color (including variations of white).
This 30-color wireless controller lets you choose from 30 pre-programmed colors, while providing an independent dimmer for brightness control and an on/off switch.
A remote touchpad is included for operation from up to 100' away. Also included are six pre-programmed settings, with speed control, that produce optional dynamic color-changing effects.
The touchpad, which operates using an included type 27A (12V) battery, can be surface mounted or installed in a junction box (where allowed by building code). To independently control lighting in separate areas, use a touchpad and controller for each area. Alternatively, to simultaneously control lighting in multiple areas*, use a single touchpad with as many controllers as you need.
If your installation of color-controlled LED tape lighting involves long lighting runs (greater than 30'), you may observe a shift in the color or brightness of the LEDs furthest from the power supply – a result of unavoidable voltage drop. If you find the shift objectionable, it can be remedied by augmenting your installation with a color-controller signal amplifier paired with an additional power supply.
* When operating multiple color controllers using a wireless touchpad, only static colors can be controlled or synchronized. Dynamic color-changing effects will not operate in synchronicity.