00D5541 - 58mm x 24mm Split-Pin Handle
Tansu (the Japanese word for “trunk”) refers to a variety of trunks, chests, boxes and storage cabinetry popular in Japan from about 1650 to 1920. Combining the skills of the cabinetmaker, blacksmith and lacquer artist, Tansu can run the gamut from simple unadorned cabinetry to ornate chests using 100 or more pieces of hardware.
A traditional design, this inexpensive die-cast handle has steel escutcheons and split pins.
Mounted through an undersized punched or drilled hole, the pins trap the handle. Pin ends are bent to hold the hardware in place (much like a box staple).
Finished black. Measures 58mm wide by 24mm high; maximum recommended material thickness is 5/8”.
WARNING: This product can expose you to chemicals including Nickel (metallic), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Tansu Split-Pin Plate Handle
Tansu (the Japanese word for “trunk”) refers to a variety of trunks, chests, boxes and storage cabinetry popular in Japan from about 1650 to 1920. Combining the skills of the cabinetmaker, blacksmith and lacquer artist, Tansu can run the gamut from simple unadorned cabinetry to ornate chests using 100 or more pieces of hardware.
A traditional design, this inexpensive die-cast handle has steel escutcheons and split pins.
Mounted through an undersized punched or drilled hole, the pins trap the handle. Pin ends are bent to hold the hardware in place (much like a box staple).
Finished black. Measures 58mm wide by 24mm high; maximum recommended material thickness is 5/8”.
