Q: What can I clip a tarp to without grommets?
A tarp clip like this one grips the tarp material directly between two toothed jaws, so you don't need a grommet or hemmed edge to get a secure hold.
00K0905 - EasyKlip, each
Made from tough glass-fiber-reinforced nylon, this versatile clip exerts a firm, no-slip hold on tarps or other sheet materials, even those without a hem.
One section of the two-piece jaw has a 3/8" diameter hole for a cord or bungee; as tension on the cord increases, the jaw is pulled more tightly against the opposing jaw, wedging the material in place.
The 1 1/2" wide toothed gripping surface helps distribute the load, minimizing the risk of tearing. Pressing a lever releases the jaws, allowing easy removal. 3" long with a load capacity of over 200 lb. An excellent design with many uses.
A tarp clip like this one grips the tarp material directly between two toothed jaws, so you don't need a grommet or hemmed edge to get a secure hold.
It's rated for loads over 200 lb, with the jaw tightening further as tension increases rather than slipping loose.
Not necessarily. The 1 1/2" wide toothed surface spreads the load across the material instead of concentrating it at one point, which is what usually causes tearing.
Yes, one jaw includes a 3/8" hole sized for a cord or bungee, so you can tie down whatever the clip is holding in place.
Press the lever to release the two-piece jaw, so you can pull the clip free without wrestling it off by hand.
| Materials | Glass-fiber-reinforced nylon |
| Dimensions | 3" long; 1 1/2" wide gripping surface |
| Compatibility Dimensions | Accepts cord or a bungee up to 3/8" via the mounting hole |
| Capacity | Over 200 lb pull |
| Includes | Tarp clip |
| Package Quantity | 1 item |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
EasyKlip
Made from tough glass-fiber-reinforced nylon, this versatile clip exerts a firm, no-slip hold on tarps or other sheet materials, even those without a hem.
One section of the two-piece jaw has a 3/8" diameter hole for a cord or bungee; as tension on the cord increases, the jaw is pulled more tightly against the opposing jaw, wedging the material in place.
The 1 1/2" wide toothed gripping surface helps distribute the load, minimizing the risk of tearing. Pressing a lever releases the jaws, allowing easy removal. 3" long with a load capacity of over 200 lb. An excellent design with many uses.
Choose an option to view item availability.
Choose an option to view item availability.
