Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Using the Veritas Workshop Striking Knife and a pocket layout square to mark a workpiece
05D2005 - Veritas Workshop Striking Knife
Close-up of Striking Knife blade
05D2005 - Veritas Workshop Striking Knife
Using the Veritas Workshop Striking Knife and a pocket layout square to mark a workpiece
05D2005 - Veritas Workshop Striking Knife
Close-up of Striking Knife blade
05D2005 - Veritas Workshop Striking Knife

Veritas Workshop Striking KnifeMade in Canada

This item is not available for this region.

Like pencils, there never seems to be a striking knife at hand when you need it. We've produced this high-quality, well-priced knife so you can affordably leave several around your shop.

The knife has an A2 tool-steel blade with a 55° included angle at the tip. Ground to a keen edge at a 25° bevel angle, it slices wood fibers cleanly. It leaves an incised marking line that serves to guide a saw or chisel when starting a cut, helping to improve accuracy.

At less than 1/32" thick and 5/16" wide, the blade projects about 1 1/2" from the handle, making it particularly useful for the precise transfer work required for dovetail layouts. The dual bevel makes it equally comfortable for right- or left-hand use, or marking either side of a reference surface.

The nylon-reinforced ABS handle is contoured for a comfortable, controlled grip, with flats on the sides to provide tactile cues for blade orientation and finger placement. They also prevent the knife from rolling on a surface. Supplied with a guard to protect the tip in storage. 6 5/8" long overall.

Made in Canada. Excellent value in what should be a shop staple.

Using the Veritas Workshop Striking Knife and a pocket layout square to mark a workpiece

Options:

Variations:

    Veritas Workshop Striking Knife

    Like pencils, there never seems to be a striking knife at hand when you need it. We've produced this high-quality, well-priced knife so you can affordably leave several around your shop.

    The knife has an A2 tool-steel blade with a 55° included angle at the tip. Ground to a keen edge at a 25° bevel angle, it slices wood fibers cleanly. It leaves an incised marking line that serves to guide a saw or chisel when starting a cut, helping to improve accuracy.

    At less than 1/32" thick and 5/16" wide, the blade projects about 1 1/2" from the handle, making it particularly useful for the precise transfer work required for dovetail layouts. The dual bevel makes it equally comfortable for right- or left-hand use, or marking either side of a reference surface.

    The nylon-reinforced ABS handle is contoured for a comfortable, controlled grip, with flats on the sides to provide tactile cues for blade orientation and finger placement. They also prevent the knife from rolling on a surface. Supplied with a guard to protect the tip in storage. 6 5/8" long overall.

    Made in Canada. Excellent value in what should be a shop staple.

    Related Products

    Original prototype bevel square and the Lee Valley replica bevel square on a photocopy of a patent document
    15N0901 - Lee Valley Replica Bevel Square
    A lip on the Lee Valley replica bevel square registers on a workpiece for marking an angle
    Close-up view of eccentric washer and screw on Lee Valley replica bevel square
    Referencing the depth of a tenon using the Lee Valley replica bevel square
    Lee Valley Replica Bevel Square
    Product Information
    Micro-Adjust Gauge measuring the depth of a tenon
    05N3520 - Graduated Micro-Adjust Marking Gauge
    05N3521 - Metric Graduated Micro-Adjust Wheel Marking Gauge
    05N3510 - Standard Micro-Adjust Marking Gauge
    Two Micro-Adjust Wheel Marking Gauges sitting on a tenon
    Illustration of marking gauge cutting a line across the end of a board
    Veritas Micro-Adjust Wheel Marking Gauges
    Veritas Micro-Adjust Wheel Marking Gauges
    35N1601 - 3"" Try/Miter Square
    35N1601 - 3
    35N0901 - 4" Try Square
    Small Squares
    60N3002 - 8" Stainless Square
    Aluminum and Steel Try Squares
    60N3001 - 6" Stainless Square
    60N3002 - 8" Stainless Square
    60N3003 - 10" Stainless Square
    60N3004 - 12" Stainless Square
    Aluminum and Steel Try Squares