Shop-made wooden depth stop and hardware not included.
For cutting fret slots in acoustic guitar fingerboards, the fine luthier's saw is made in Sheffield, England, with a spring-steel blade, polished brass fittings and a comfortable turned hardwood handle.
The teeth are set to cut a 0.021" kerf, accommodating standard medium-gauge fret wire. The 10" long, 16 tpi blade cuts on the pull stroke and has a brass spine for rigidity, is through-drilled in two places for mounting a shop-made wooden depth stop, and has a hang hole.
WARNING: This product can expose you to chemicals including Nickel (metallic), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Pax Fret-Wire Saw
For cutting fret slots in acoustic guitar fingerboards, the fine luthier's saw is made in Sheffield, England, with a spring-steel blade, polished brass fittings and a comfortable turned hardwood handle.
The teeth are set to cut a 0.021" kerf, accommodating standard medium-gauge fret wire. The 10" long, 16 tpi blade cuts on the pull stroke and has a brass spine for rigidity, is through-drilled in two places for mounting a shop-made wooden depth stop, and has a hang hole.
