Q: What does a saw depth stop do?
It gives you a way to consistently control cut depth when using a backsaw, so each cut stops at the same depth.
Shown mounted on our Veritas Crosscut Carcass Saw (not included).
Here's a simple way to consistently control cut depth when using a backsaw. The 9" long aluminum rail is lightweight and easy to attach to either side of the blade with a high-friction magnetic strip. The stainless-steel rods give the rail a 2 3/8" range of adjustment.
The two clamp knobs, with rare-earth magnet bases, register against the spine of the saw; simply tighten the brass knobs to lock the rail at the desired cut depth. A reliable aid when a precise cut is needed.
Made in Canada.
It gives you a way to consistently control cut depth when using a backsaw, so each cut stops at the same depth.
A high-friction magnetic strip holds the aluminum rail against either side of the blade, and two clamp knobs with rare-earth magnet bases register against the spine of the saw.
The stainless-steel rods give the rail a 2 3/8" range of adjustment.
Yes, the rail attaches to either side of the blade, so you can set it up for the way you work.
The aluminum rail is 9" long.
Tighten the brass knobs to lock the rail at the desired cut depth.
The saw depth stop is made in Canada.
| Materials | Aluminum rail; stainless-steel rods; brass hardware; rare-earth magnets |
| Dimensions | 9" long rail |
| Capacity | 2 3/8" range of adjustment |
| Includes | Aluminum rail; stainless-steel rods; clamp knobs; magnetic strip |
| Package Quantity | 1 item |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause Reproductive. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Veritas Saw Depth Stop
Here's a simple way to consistently control cut depth when using a backsaw. The 9" long aluminum rail is lightweight and easy to attach to either side of the blade with a high-friction magnetic strip. The stainless-steel rods give the rail a 2 3/8" range of adjustment.
The two clamp knobs, with rare-earth magnet bases, register against the spine of the saw; simply tighten the brass knobs to lock the rail at the desired cut depth. A reliable aid when a precise cut is needed.
Made in Canada.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
