Skip to contentAccessibility Statement

Free Shipping on Orders of $50 or More

New Pickering Ridge Location - Coming Soon

ITEM ADDED TO YOUR CART ()
logologoCart
Cart
99W1875 - Flex-Shaft Nut Driver & Hose Clamps Set
The nut driver being used to adjust one of the included hose clamps
The nut driver’s flex shaft being bent to 90 degrees
99W1875 - Flex-Shaft Nut Driver & Hose Clamps Set
A person uses the flex-shaft nut driver to tighten a hose clamp in a truck’s engine compartment
99W1875 - Flex-Shaft Nut Driver & Hose Clamps Set

99W1875 - Flex-Shaft Nut Driver & Hose Clamps Set

Flex-Shaft Nut Driver & Hose Clamps Set

Item undefined, undefined

This item is not available for this region.

This item is discontinued. Available while quantities last.

Hose clamps are tremendously useful in countless situations – the trouble is, they’re often needed in hard-to-reach spots where it’s difficult to adjust them with a regular screwdriver or socket driver.

This driver has a flex shaft that bends up to 90° to reach around obstructions or to offset the handle from adjacent surfaces for knuckle clearance. Just over 11" long, it has a 5/16" socket at the end that fits the standard worm-drive screws found on most hose clamps. It comes with ten good-quality stainless-steel hose clamps in a range of sizes (from a minimum 1/2" diameter up to 5" maximum) so you can choose the one best suited to the job.

The driver and hose clamps are supplied in a convenient reusable storage pouch, so whenever you need a hose clamp – an inevitability in most households – everything you need is in one place.

Excellent value, and a true frustration-saver.

99W1875 - Flex-Shaft Nut Driver & Hose Clamps Set

Options:

Variations:

    Flex-Shaft Nut Driver & Hose Clamps Set

    This item is discontinued. Available while quantities last.

    Hose clamps are tremendously useful in countless situations – the trouble is, they’re often needed in hard-to-reach spots where it’s difficult to adjust them with a regular screwdriver or socket driver.

    This driver has a flex shaft that bends up to 90° to reach around obstructions or to offset the handle from adjacent surfaces for knuckle clearance. Just over 11" long, it has a 5/16" socket at the end that fits the standard worm-drive screws found on most hose clamps. It comes with ten good-quality stainless-steel hose clamps in a range of sizes (from a minimum 1/2" diameter up to 5" maximum) so you can choose the one best suited to the job.

    The driver and hose clamps are supplied in a convenient reusable storage pouch, so whenever you need a hose clamp – an inevitability in most households – everything you need is in one place.

    Excellent value, and a true frustration-saver.

    Related Products

    Tightening a light switch cover screw with a bit in the Utilitas  fingertip screwdriver
    50K6701 - Fingertip Bit Holders, pkg. of 3
    Adjusting a setscrew on the side of a hand plane with a bit in the Utilitas fingertip screwdriver
    Fingertip Bit Holders
    Product Information
    17K0215 - Bit Extender, 150mm (6")
    17K0230 - Bit Extender, 300mm (12")
    17K0260 - Bit Extender, 600mm (24")
    Using a bit extender to install a screw in a shelf bracket
    Using a bit extender to install a screw in the back of a bookshelf
    Bit Extenders