25K6186 - Kreg 720 Pro Pocket-Hole Kit
Item No Longer Available.
This offer has expired. TEST
From the latest generation of Kreg’s pocket-hole joinery system, the sturdy, versatile 720 jig is quick to set up and easy to use. Containing everything you need for a wide range of pocket-hole joinery, the kit can be used on its own or in combination with other components of Kreg’s modular, expandable 700-series system.
To hold the jig in position while you drill, its built-in lever-operated clamp can be tightened one-handed. The jaws automatically adjust for stock from 1/2" to 1 1/2" thick and have non-slip liners to prevent shifting. An adjustment knob lets you control the clamping force to permit a firm hold without marring the work. Once set, it automatically maintains the same force regardless of stock thickness, so you can switch workpieces without making adjustments.
Made of glass-reinforced nylon with a steel core, the drill guide block contains three hardened steel bushings that let you space two holes 9/16", 7/8" or 1 7/16" apart, depending on material width.
The included 6 1/4" HSS stepped drill bit has a 3/16" diameter by 1/2" pilot, a 3/8" diameter counterbore, and a 1/4" hex shank that’s grooved for use in quick-change chucks. For easy, accurate depth settings, simply align a hole in the supplied depth collar with one of the engraved markings on the bit shank, indicating the correct placement for 1/2", 3/4" and 1 1/2" thick material.
To improve stability when working with sheet goods or other large stock, it also includes two sturdy stock-support wings that snap into place on either side of the jig (and are just as easy to remove when not needed).
The wings have a hinged lid to double as storage for small accessories such as pocket-hole screws and drill bits. Sliding work stops travel on a 6" track on the top of each support wing and can be locked in position to ensure precise, repeatable hole placement up to 8 3/4" from the edge of a workpiece.
An included snap-in shroud connects to a 1 1/4" vacuum hose (1 7/8" and 2 1/2" adapters also included) for easy debris clearance, with a pivoting outlet so you can orient the hose to avoid obstruction. The jig also comes with a table clamp to secure the jig to a workbench or other work surface, a combination hex key and material-thickness gauge, two #2 square-recess drivers (6" and 3" long) and 160 pocket-hole screws (one hundred 1 1/4" screws and sixty 2 1/2" screws).
As a limited offer, this kit comes with a Kreg small auto-adjust clamp, which has a 3 3/4" reach and holds material up to 2 7/8" thick. A thumbscrew adjusts the clamping force, so you can apply a light hold for delicate work or up to 400 lb of force at the maximum setting.
In addition, the kit includes full project plans for a console table made with pocket-hole joinery, as well as 50 bonus screws: 10 each of 1" coarse pan-head, 1 1/4" fine washer-head, and 1 1/4", 1 1/2" and 2 1/2" coarse-thread washer-head screws.
WARNING: This product can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size), which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Kreg 720 Pro Pocket-Hole Kit
This offer has expired. TEST
From the latest generation of Kreg’s pocket-hole joinery system, the sturdy, versatile 720 jig is quick to set up and easy to use. Containing everything you need for a wide range of pocket-hole joinery, the kit can be used on its own or in combination with other components of Kreg’s modular, expandable 700-series system.
To hold the jig in position while you drill, its built-in lever-operated clamp can be tightened one-handed. The jaws automatically adjust for stock from 1/2" to 1 1/2" thick and have non-slip liners to prevent shifting. An adjustment knob lets you control the clamping force to permit a firm hold without marring the work. Once set, it automatically maintains the same force regardless of stock thickness, so you can switch workpieces without making adjustments.
Made of glass-reinforced nylon with a steel core, the drill guide block contains three hardened steel bushings that let you space two holes 9/16", 7/8" or 1 7/16" apart, depending on material width.
The included 6 1/4" HSS stepped drill bit has a 3/16" diameter by 1/2" pilot, a 3/8" diameter counterbore, and a 1/4" hex shank that’s grooved for use in quick-change chucks. For easy, accurate depth settings, simply align a hole in the supplied depth collar with one of the engraved markings on the bit shank, indicating the correct placement for 1/2", 3/4" and 1 1/2" thick material.
To improve stability when working with sheet goods or other large stock, it also includes two sturdy stock-support wings that snap into place on either side of the jig (and are just as easy to remove when not needed).
The wings have a hinged lid to double as storage for small accessories such as pocket-hole screws and drill bits. Sliding work stops travel on a 6" track on the top of each support wing and can be locked in position to ensure precise, repeatable hole placement up to 8 3/4" from the edge of a workpiece.
An included snap-in shroud connects to a 1 1/4" vacuum hose (1 7/8" and 2 1/2" adapters also included) for easy debris clearance, with a pivoting outlet so you can orient the hose to avoid obstruction. The jig also comes with a table clamp to secure the jig to a workbench or other work surface, a combination hex key and material-thickness gauge, two #2 square-recess drivers (6" and 3" long) and 160 pocket-hole screws (one hundred 1 1/4" screws and sixty 2 1/2" screws).
As a limited offer, this kit comes with a Kreg small auto-adjust clamp, which has a 3 3/4" reach and holds material up to 2 7/8" thick. A thumbscrew adjusts the clamping force, so you can apply a light hold for delicate work or up to 400 lb of force at the maximum setting.
In addition, the kit includes full project plans for a console table made with pocket-hole joinery, as well as 50 bonus screws: 10 each of 1" coarse pan-head, 1 1/4" fine washer-head, and 1 1/4", 1 1/2" and 2 1/2" coarse-thread washer-head screws.
