Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
A pair of Domino joinery table wall hooks mounted on a plywood wall panel
A Domino joinery table hung from a pair of wall hooks mounted on a plywood wall panel
A close-up view of a wall hook registered in a cut-out in the base of a Domino joinery table
Using a ratcheting socket driver to assemble a pair of wall hooks for a Domino joinery table
15K1201 - Wall Hooks for Veritas Domino Joinery Table, pr.
15K1201 - Wall Hooks for Veritas Domino Joinery Table, pr.
A pair of Domino joinery table wall hooks mounted on a plywood wall panel
A Domino joinery table hung from a pair of wall hooks mounted on a plywood wall panel
A close-up view of a wall hook registered in a cut-out in the base of a Domino joinery table
Using a ratcheting socket driver to assemble a pair of wall hooks for a Domino joinery table
15K1201 - Wall Hooks for Veritas Domino Joinery Table, pr.
15K1201 - Wall Hooks for Veritas Domino Joinery Table, pr.

Wall Hooks for Veritas Domino Joinery TableMade in Canada

(Pair)

Quantity:

Until July 2, 2025, save 15% on this accessory for the Veritas Domino Joinery Table. After this date, the price will be $16.50.

To keep the Veritas Domino Joinery Table out of the way when not in use, these Baltic birch plywood wall hooks are sturdy enough to support the 21 lb table.

Each consists of two parts: a wall plate to allow easy, secure surface mounting on a studded wall, and a projecting hook that registers in cut-outs in the base of the table.

Minor assembly required with supplied bolts. Mounting fasteners not included. Made in Canada.

A pair of Domino joinery table wall hooks mounted on a plywood wall panel

Options:

Variations:

  • 15K1201 - Wall Hooks for Veritas Domino Joinery Table, pr.
    1 - $14.00

Wall Hooks for Veritas Domino Joinery Table

Until July 2, 2025, save 15% on this accessory for the Veritas Domino Joinery Table. After this date, the price will be $16.50.

To keep the Veritas Domino Joinery Table out of the way when not in use, these Baltic birch plywood wall hooks are sturdy enough to support the 21 lb table.

Each consists of two parts: a wall plate to allow easy, secure surface mounting on a studded wall, and a projecting hook that registers in cut-outs in the base of the table.

Minor assembly required with supplied bolts. Mounting fasteners not included. Made in Canada.

Related Products

05J1701 - A Domino DF 500 used on a Veritas Domino joinery table, with shim sets and wall-mounted hooks nearby
05J1701 - Veritas Domino Joinery Table Master Set
05J1701 - Veritas Domino Joinery Table Master Set
05J1701 - Veritas Domino Joinery Table Master Set
05J1701 - Veritas Domino Joinery Table Master Set
05J1701 - Installing the 12mm shims under the base plate of a Domino DF 500 on a Veritas Domino joinery table
05J1701 - A pair of Domino table wall hooks mounted on a plywood wall panel
05J1701 - Veritas Domino Joinery Table Master Set
05J1701 - Veritas Domino Joinery Table Master Set
Veritas Domino Joinery Table Master Set
Product Information
A Domino joiner used on a Veritas Domino joinery table to cut butt-joint mortises in end grain
A Domino joiner used on a Veritas Domino joinery table to cut butt-joint mortises in side grain
The offset registration gauge being used to position the right-angle fence
A Domino joiner used on a Veritas Domino joinery table to cut miter-joint mortises in end grain
A Domino joiner mounted on a Veritas Domino joinery table, shown with two fences and two hold-downs
The underside of a Domino joinery table, showing 4” tall base made of Baltic birch plywood
Steel mounting studs threaded into a Domino joiner to mount it on a Veritas Domino joinery table
Securing a Domino joiner in position on a Veritas Domino joinery table
Installing shims in the table slots of a Veritas Domino joinery table to create a vertical offset
Two frames with butt and miter joints cut using a Domino joiner on a Veritas Domino joinery table
05J1701 - Veritas Domino Joinery Table
Veritas Domino Joinery Table
Product Information
05J1706 - Setting shims on a Veritas Domino joinery table to raise a Domino joiner for use on thicker stock
05J1706 - Set of 8 Large Shims for Veritas Domino Joinery Table
05J1706 - Set of 8 Large Shims for Veritas Domino Joinery Table
Large Shim Set for Veritas Domino Joinery Table
Product Information
Using the Domino joiner horizontally with spacer to cut holes for Domino tenons for a joint in deck boards
Using the Domino joiner at a 45° angle to cut holes for Domino tenon for a miter joint between two boards
Using the Domino joiner horizontally to cut holes for Domino tenons for an end butt joint in deck boards
Dial at two different settings to adjust the mortise width for different sized tenons and to allow for wood movement when using floating tenons
Festool Domino Joiner DF 500 Q Plus
Festool Domino Joiner DF 500 Q Set
Festool Domino DF 500 Q Joiner
Product Information