Description

Cool Blocks are designed to replace the metal guides that come installed on your bandsaw. Made of phenolic resin embedded with graphite to reduce friction on the blade, they stay cooler than metal blocks, reducing metal fatigue and extending blade life. They can be set closer to the blade for better accuracy and control of cuts. They will also lubricate the blade without staining the wood. Your bandsaw will run more smoothly and quietly.

Although the blocks are designed to fit specific bandsaws, they may fit other models; check the size of your blade guides. The sets of 4 blocks are available in the following bandsaw models and sizes:

  • Delta 8" or 10" blocks: 3/4" × 3/16" in diameter
  • Delta 14" blocks: three 1/2" × 1/2" × 3/4" blocks and one 1/2" × 3/8" × 1" block
  • Delta 16" blocks: 5/16" × 5/16" × 3/4"
  • General 15" blocks: Jet, Grizzly, 1/2" × 1/2" × 3/4"
  • Sears 12" blocks: 3/8" × 3/8" × 3/4"

Made in USA.

Surcharge