50J5001 - Center-Finding Pin
There are many times when you want to mark a center point before you start to drill or rout, particularly when using larger, harder-to-center bits. Chuck this alignment pin into your drill press or router, mark the center point, and you are all set.
Case hardened and zinc plated, the double-pointed pin is 1/4" diameter on one end and 1/2" on the other. 3" long.
Made in Canada.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause Reproductive. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Center-Finding Pin
There are many times when you want to mark a center point before you start to drill or rout, particularly when using larger, harder-to-center bits. Chuck this alignment pin into your drill press or router, mark the center point, and you are all set.
Case hardened and zinc plated, the double-pointed pin is 1/4" diameter on one end and 1/2" on the other. 3" long.
Made in Canada.
Choose an option to view item availability.
