Known for their accuracy, ease of use, and sturdy construction, Incra miter gauges are excellent upgrades for any table saw.
The protractor head has a patented indexing system for quick, positive adjustment. Adjustable expansion discs in the 3/8" × 3/4" table bars provide low-friction travel and remove lateral play within the miter slot.
All models include a hex driver or key for adjustments; the Miter 1000SE and 3000SE also come with sub-fence mounting hardware.
Made in the USA from plated heavy-gauge steel and aluminum, they simplify making precise and repeatable cross-grain cuts. The angular accuracy for all models is 1/50 of a degree.
Equally useful on a bandsaw, disc sander, router table or table saw, the Incra V120 Miter Gauge is an economical but accurate miter gauge.
The head rotates 60° left or right, and has stops at 1° intervals and at ±22 1/2°. Slotted screw holes allow you to attach a shop-made fence for stock support or work with a stop-block.
The Incra Miter 1000SE Gauge is a significant improvement over the small, imprecise gauges that come with many table saws.
Its protractor head indexes every 5°, with additional stops at ±22 1/2° and ±67 1/2°. A vernier scale provides precise adjustment to 6 minutes (1/10°) anywhere within its 180° range. The 18 1/4" extruded aluminum fence, which extends to 31", has a T-track to mount a sub-fence, and an integral scale for direct reading.
A micro-adjust stop allows repeatable cuts, and has dual flip arms that are used together or independently for different set-ups. The flip arms interlock with the fence to prevent lifting by a mitered workpiece. Reversible for use either side of the saw blade, this is an accurate and versatile table-saw accessory.
With the same quality of construction as the 1000SE, the Incra Miter 3000SE Gauge is Incra’s largest-capacity gauge. While the 1000SE has stops every 5°, this gauge indexes in 0.5° increments over its 180° range. It also has a much longer fence at 27" (extendable to 48 1/2").
Like the 1000SE, it accepts a user-made sub-fence, is equipped with a direct-reading scale, and has a dual-arm micro-adjust flip stop. Usable right or left of the saw blade, this is an excellent gauge for larger table saws or those with a table extension.
Not available for shipment to Québec.