95T2080 - SawStop Contractor Table Saw with Aluminum Fence, 30" Rails
This item is not available for this region.
SawStop saws offer a safety feature unique in the industry: a braking system that can reduce a potentially severe injury to just a minor cut. Within 5 milliseconds of detecting contact between your skin and the saw blade, the braking system automatically stops the blade, retracts it under the saw’s table and shuts off power to the saw’s motor. This all happens quicker than the eye can see and certainly faster than anyone can react. If the system ever activates, both the blade and the brake cartridge are easy to replace, returning the saw to normal operation in just a few minutes.
To ensure the safety system is in working order, the saw runs a self-diagnostic every time you turn on the main power switch. If an issue is detected, a pattern of LED lights indicates its source. A temporary bypass mode lets you cut electrically conductive materials that can cause false activations, such as very green wood. If you’re unsure about a particular piece of stock, you can make test cuts in bypass mode and the LEDs indicate if the material would trigger the brake in normal mode. Other safety features include a blade guard, a riving knife, anti-kickback pawls, hands-free shut-down, and a power switch override to prevent accidental or unsupervised activation.
While the SawStop safety system is unique and effective, this is also an exceptional table saw that delivers excellent cut quality, accuracy and reliability. Fences glide smoothly yet are rigid when locked, blade height and tilt adjustments are backlash-free, and dust collection is a priority, not an afterthought.
The versatile 10" contractor saw is a full-featured and highly adaptable table saw.  It can be outfitted for minimum weight and footprint, for job-site portability or to enhance shop use. The base saw comes with a 20" × 27" cast-iron table (plus two 12" × 27" stamped steel extension wings) and a sturdy stationary base with adjustable levelling feet. The included blade guard has three separately hinged side panels to minimize exposure of the blade yet still allow good blade visibility. The 1.75hp motor runs on standard 110V AC power; to use it with 220V AC, please contact our Customer Service or your local store to ask about a conversion kit.
The saw is available with three fence options. The contractor saw equipped with the aluminum fence is the lightest stationary configuration with the smallest overall footprint. The simplest of the three, the aluminum fence has a 30" rip capacity, and dual cursors that make it easy to position on either side of the blade. You can fine-tune the fence/rail clamping force and the alignment between fence and miter slots. This fence is not compatible with the overarm dust collection accessory.
Made of rigid heavy-gauge steel, the professional T-Glide fence minimizes deflection even in heavy use and has removable low-friction face plates.
The T-Glide Advance fence is SawStop’s adaptation of the classic Unifence* for safety and accuracy on rip cuts and when crosscutting smaller stock. The steel fence’s aluminum face is reversible for use on either side of the blade and has a dovetail track for mounting accessories. It can be set horizontally so it won't obstruct a push stick or blade guard when working with narrow stock, and can be positioned ahead of blade, creating space so it won’t trap offcuts against the blade.
With the T-Glide and T-Glide Advance fences, you can choose rails with either a 36" or 52" rip capacity.  Each comes with a side table made of wood with a low-friction laminate surface.
Due to their size and weight, SawStop saws are available only at our stores. Because they can be a challenge to transport home yourself, we offer a delivery service that is free of charge for locations within a 20km radius of our stores, with additional cost if you are located outside that limit. Please contact the store nearest you for details.
* Long hailed as one of the most practical table-saw fences ever made, the Delta Unifence had a movable face that could be set horizontally or vertically to suit the thickness of the work and could slide back and forth on the main body of the fence. When positioned ahead of the blade, it created space that prevented the offcut from binding between the blade and the fence, reducing risk of kickback. That combination of safety and cut control is what made the Unifence a benchmark design – and why SawStop chose to build on it here.
Contractor Table Saw with Aluminum Fence, 30" Rails
Item #: 95T2080
SawStop Model #: CNS175-PFA30
Contractor Table Saw with T-Glide Fence, 36" Rails
Item #: 95T2081
SawStop Model #: CNS175-TGP236
Contractor Table Saw with T-Glide Fence, 52" Rails
Item #: 95T2082
SawStop Model #: CNS175-TGP252
Contractor Table Saw with T-Glide Advance Fence, 36" Rails
Item #: 95T2083
SawStop Model #: CNS175-ATGP36
Contractor Table Saw with T-Glide Advance Fence, 52" Rails
Item #: 95T2084
SawStop Model #: CNS175-ATGP52
Options:
Option
Variations:
SawStop Contractor Table Saw
SawStop saws offer a safety feature unique in the industry: a braking system that can reduce a potentially severe injury to just a minor cut. Within 5 milliseconds of detecting contact between your skin and the saw blade, the braking system automatically stops the blade, retracts it under the saw’s table and shuts off power to the saw’s motor. This all happens quicker than the eye can see and certainly faster than anyone can react. If the system ever activates, both the blade and the brake cartridge are easy to replace, returning the saw to normal operation in just a few minutes.
To ensure the safety system is in working order, the saw runs a self-diagnostic every time you turn on the main power switch. If an issue is detected, a pattern of LED lights indicates its source. A temporary bypass mode lets you cut electrically conductive materials that can cause false activations, such as very green wood. If you’re unsure about a particular piece of stock, you can make test cuts in bypass mode and the LEDs indicate if the material would trigger the brake in normal mode. Other safety features include a blade guard, a riving knife, anti-kickback pawls, hands-free shut-down, and a power switch override to prevent accidental or unsupervised activation.
While the SawStop safety system is unique and effective, this is also an exceptional table saw that delivers excellent cut quality, accuracy and reliability. Fences glide smoothly yet are rigid when locked, blade height and tilt adjustments are backlash-free, and dust collection is a priority, not an afterthought.
The versatile 10" contractor saw is a full-featured and highly adaptable table saw.  It can be outfitted for minimum weight and footprint, for job-site portability or to enhance shop use. The base saw comes with a 20" × 27" cast-iron table (plus two 12" × 27" stamped steel extension wings) and a sturdy stationary base with adjustable levelling feet. The included blade guard has three separately hinged side panels to minimize exposure of the blade yet still allow good blade visibility. The 1.75hp motor runs on standard 110V AC power; to use it with 220V AC, please contact our Customer Service or your local store to ask about a conversion kit.
The saw is available with three fence options. The contractor saw equipped with the aluminum fence is the lightest stationary configuration with the smallest overall footprint. The simplest of the three, the aluminum fence has a 30" rip capacity, and dual cursors that make it easy to position on either side of the blade. You can fine-tune the fence/rail clamping force and the alignment between fence and miter slots. This fence is not compatible with the overarm dust collection accessory.
Made of rigid heavy-gauge steel, the professional T-Glide fence minimizes deflection even in heavy use and has removable low-friction face plates.
The T-Glide Advance fence is SawStop’s adaptation of the classic Unifence* for safety and accuracy on rip cuts and when crosscutting smaller stock. The steel fence’s aluminum face is reversible for use on either side of the blade and has a dovetail track for mounting accessories. It can be set horizontally so it won't obstruct a push stick or blade guard when working with narrow stock, and can be positioned ahead of blade, creating space so it won’t trap offcuts against the blade.
With the T-Glide and T-Glide Advance fences, you can choose rails with either a 36" or 52" rip capacity.  Each comes with a side table made of wood with a low-friction laminate surface.
Due to their size and weight, SawStop saws are available only at our stores. Because they can be a challenge to transport home yourself, we offer a delivery service that is free of charge for locations within a 20km radius of our stores, with additional cost if you are located outside that limit. Please contact the store nearest you for details.
* Long hailed as one of the most practical table-saw fences ever made, the Delta Unifence had a movable face that could be set horizontally or vertically to suit the thickness of the work and could slide back and forth on the main body of the fence. When positioned ahead of the blade, it created space that prevented the offcut from binding between the blade and the fence, reducing risk of kickback. That combination of safety and cut control is what made the Unifence a benchmark design – and why SawStop chose to build on it here.
Contractor Table Saw with Aluminum Fence, 30" Rails
Item #: 95T2080
SawStop Model #: CNS175-PFA30
Contractor Table Saw with T-Glide Fence, 36" Rails
Item #: 95T2081
SawStop Model #: CNS175-TGP236
Contractor Table Saw with T-Glide Fence, 52" Rails
Item #: 95T2082
SawStop Model #: CNS175-TGP252
Contractor Table Saw with T-Glide Advance Fence, 36" Rails
Item #: 95T2083
SawStop Model #: CNS175-ATGP36
Contractor Table Saw with T-Glide Advance Fence, 52" Rails
Item #: 95T2084
SawStop Model #: CNS175-ATGP52
