Most finishes today contain petroleum distillates, solvents or heavy metal drier additives. This doesn't. A combination of highly refined polymerized linseed oil and natural-resin varnish (modified pine sap), it strictly adheres to the standards established by the FDA (Food and Drug Administration) and qualify as non-toxic and safe for food-contact surfaces in both its uncured and cured (wet and dry) states.
Its high resin content produces a durable water-resistant finish that buffs to a warm semi-gloss sheen.
Made using traditional 18th-century production techniques, it is a high-yield finish, providing coverage of at least 75 square feet per 16 fl oz/473ml.
Application is straightforward—brush or wipe on in moderation, leave to penetrate for 60 minutes, then wipe and buff dry. Additional coats can be applied after as little as 24 hours with two to three coats recommended for best protection. Maintain sheen with an occasional buff with a soft, clean cloth.
A simple, environmentally-friendly finishing solution available in 16 fl oz/473ml and 32 fl oz/946ml containers.
Made in USA.
Not available for shipment to California, Colorado, Connecticut, District of Columbia, Maine, Minnesota, Oregon, Rhode Island or Vermont.