Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
09A0799 - Whipple Hook
Whipple hook attached to a work surface, used as a planing stop
09A0799 - Whipple Hook
Whipple hook attached to a work surface, used as a planing stop

Whipple Hook

This item is not available for this region.

Modelled after a bench hook patented in 1900 by Rollin P. Whipple, this simple one-piece fitting lets you add a pair of useful stops to a workbench or job-site work surface in the time it takes to drive two screws.

The horizontal face functions as a 1 3/4" wide and up to 7/16" high stop for planing material 1/2" thick or more, holding your stock in place without obstructing the tool.

To secure work held vertically, you can brace stock against the 1 3/8" wide stop on the front face, or use it much like a crochet to capture panels up to 9/16" thick behind it. The height of each stop is easily adjusted with the addition of a third screw (optional).

Both faces have toothed edges to help prevent your workpiece from shifting. Made of stainless steel; screws not included.

Designed for right-handed use.

09A0799 - Whipple Hook

Options:

Variations:

    Whipple Hook

    Modelled after a bench hook patented in 1900 by Rollin P. Whipple, this simple one-piece fitting lets you add a pair of useful stops to a workbench or job-site work surface in the time it takes to drive two screws.

    The horizontal face functions as a 1 3/4" wide and up to 7/16" high stop for planing material 1/2" thick or more, holding your stock in place without obstructing the tool.

    To secure work held vertically, you can brace stock against the 1 3/8" wide stop on the front face, or use it much like a crochet to capture panels up to 9/16" thick behind it. The height of each stop is easily adjusted with the addition of a third screw (optional).

    Both faces have toothed edges to help prevent your workpiece from shifting. Made of stainless steel; screws not included.

    Designed for right-handed use.

    Related Products

    Two planing stops positioned perpendicular to each other in bench dog holes, securing a workpiece from two sides
    Planing stop positioned in bench dog holes, supporting a workpiece with a plane sitting on top
    Veritas 9 3/4" Planing Stop
    Veritas 17 1/2" Planing Stop,
    Veritas 25 1/4" Planing Stop
    Veritas Planing Stop
    Product Information
    One brass prarie dog inserted in a workbench dog hole next to a second prarie dog lying on the workbench
    A Veritas Prairie Dog holds a workpiece being planed
    Two Veritas prairie dogs installed in a workbench, one recessed and the other raised for use
    Pressing the Prairie Dog with a finger to recess it into a hole
    A finger presses a Veritas Prairie Dog into a hole on a workbench, with a second Prairie Dog installed behind it
    Prairie Dog next to stop plate on a bench, with an installed Prairie Dog in background
    Diagram showing the Prairie Dog, installed in a through-hole or a blind hole, being pushed with a finger to raise or recess it
    A pair of Veritas Prairie Dogs with stop plates on a workbench
    05G1022 - Veritas Prairie Dog, pair
    05G1026 - Set of Veritas Prairie Dogs (2) & Extra Stop Plates (4)
    Veritas Prairie Dog
    05G0403 - 2 3/8" Bench Pup, each
    05G0404 - 2 3/8" Bench Pups, pair
    05G0403 - 2 3/8" Bench Pup, each
    05G0404 - 2 3/8" Bench Pups, pair
    Veritas Round Bench Pups