Skip to contentAccessibility Statement
() ARTICLE(S) DANS VOTRE PANIER
logologoPanier
Search
Panier
20L0217 - Home Machinist's Handbook
20L0217 - Home Machinist's Handbook
20L0217 - Home Machinist's Handbook
20L0217 - Home Machinist's Handbook
20L0217 - Home Machinist's Handbook
20L0217 - Home Machinist's Handbook

The Home Machinist's Handbook

par Doug Briney

Quantité :

Offert en anglais seulement

This introductory book on the use of a small lathe and a small mill was written by a mechanical engineer (who operates a clock repair service in his spare time) for readers who have neither metalworking experience nor an engineering background.

The first few chapters describe how to read engineering diagrams, how to use measuring tools such as dial calipers, micrometers and dial indicators, and what types of hand and bench tools are used, such as pin punches, vises, taps and dies.

The author uses a Sherline micro lathe and milling machine for demonstration, but the lathe operations such as facing, turning, filing, parting, reaming, boring and threading will apply to the Taig micro lathe.

Also discussed are types of metals, properties and heat treating. The last 50 pages cover 10 projects (e.g., center punch, brass mallet, brass cannon) using a lathe and milling machine.

Softcover, 8" x 9", 275 pages, 1983.

20L0217 - Home Machinist's Handbook

Options :

Variations :

  • 20L0217 - Home Machinist's Handbook
    1 - 32,50 $

The Home Machinist's Handbook

Offert en anglais seulement

This introductory book on the use of a small lathe and a small mill was written by a mechanical engineer (who operates a clock repair service in his spare time) for readers who have neither metalworking experience nor an engineering background.

The first few chapters describe how to read engineering diagrams, how to use measuring tools such as dial calipers, micrometers and dial indicators, and what types of hand and bench tools are used, such as pin punches, vises, taps and dies.

The author uses a Sherline micro lathe and milling machine for demonstration, but the lathe operations such as facing, turning, filing, parting, reaming, boring and threading will apply to the Taig micro lathe.

Also discussed are types of metals, properties and heat treating. The last 50 pages cover 10 projects (e.g., center punch, brass mallet, brass cannon) using a lathe and milling machine.

Softcover, 8" x 9", 275 pages, 1983.

Articles Connexes

08K4021 - Ensemble aspirateur PC et ponceuse pneumatique PROS 6 po
08K4021A - Ensemble aspirateur AFC et ponceuse pneumatique PROS 6 po
Tuyaux combinés d'aspiration et d'air comprimé, adaptateur de plateau et module de commande pour outils pneumatiques
Ensembles aspirateur et ponceuse pneumatique Mirka PROS 6 po
Voir cet article
Enduit protecteur et lubrifiant Boeshield T-9 à côté d'un sécateur
Une bombe aérosol d’enduit protecteur et lubrifiant Boeshield T-9 posée sur wun banc de scie
Enduit protecteur et lubrifiant Boeshield T-9 à côté d'un sécateur
56Z8050 - Enduit protecteur et lubrifiant Boeshield T-9, bouteille de 29,5 ml
56Z8030 - Enduit protecteur et lubrifiant Boeshield T-9, bombe aérosol de 340 g
Enduit protecteur et lubrifiant Boeshield T-9
Enduit protecteur et lubrifiant Boeshield T-9