05N4668 - Set of 2 Veritas Metric Edge Rules & Small Edge Rule End Stop
Quantité :
Until March 14, 2026, we’re offering this set of two Veritas metric edge rules and a small edge rule end stop at a saving of 15% compared to buying the items separately.
The aluminum rules included in this set are designed to saddle the edge of a workpiece, so they’re easy to hold accurately in position when measuring or marking layout lines.
They have an acute interior angle to ensure that they seat well, even over saw whiskers, and etched graduations that stand out clearly against the black anodized finish. The edges are bevelled, minimizing parallax errors. This also simplifies transfer of perpendicular lines from face to edge, and is particularly convenient when holding and marking off dowel rod stock.
The 3/4" wide leg on the L-shaped cross section is for face work, while the 3/8" shorter leg is for narrow stock and edge work.
The set includes 150mm and 300mm rules. The face of the wide rule leg reads left to right, while the shorter leg reads right to left. Since they share the same zero, it is easy to cross-reference when transferring marks from face to edge.
You can also use the rules on a flat surface – and, since the shape makes them much easier to pick up than a flat rule, you may find yourself reaching for them as your go-to rules. The 150mm rule is small enough to fit comfortably in a pocket.
The repositionable stop serves as a reliable locking reference point. It fits either rule, automatically squaring itself to the rule as it is tightened in place with the knurled stainless-steel screw.
An Imperial edge rules set is also available.
Made in Canada.
Options :
Variations :
Set of 2 Veritas Metric Edge Rules & Small Edge Rule End Stop
Until March 14, 2026, we’re offering this set of two Veritas metric edge rules and a small edge rule end stop at a saving of 15% compared to buying the items separately.
The aluminum rules included in this set are designed to saddle the edge of a workpiece, so they’re easy to hold accurately in position when measuring or marking layout lines.
They have an acute interior angle to ensure that they seat well, even over saw whiskers, and etched graduations that stand out clearly against the black anodized finish. The edges are bevelled, minimizing parallax errors. This also simplifies transfer of perpendicular lines from face to edge, and is particularly convenient when holding and marking off dowel rod stock.
The 3/4" wide leg on the L-shaped cross section is for face work, while the 3/8" shorter leg is for narrow stock and edge work.
The set includes 150mm and 300mm rules. The face of the wide rule leg reads left to right, while the shorter leg reads right to left. Since they share the same zero, it is easy to cross-reference when transferring marks from face to edge.
You can also use the rules on a flat surface – and, since the shape makes them much easier to pick up than a flat rule, you may find yourself reaching for them as your go-to rules. The 150mm rule is small enough to fit comfortably in a pocket.
The repositionable stop serves as a reliable locking reference point. It fits either rule, automatically squaring itself to the rule as it is tightened in place with the knurled stainless-steel screw.
An Imperial edge rules set is also available.
Made in Canada.
