XK550 - 20' Pound-In Edging
The problem with installing conventional lawn edging is the necessity of digging a trench, laying it in, backfilling, etc. With this pound-in edging, installation is greatly simplified.
Each heavy-plastic interlocking piece measures 6 1/4" wide by 5 1/2" high. Using a rubber mallet, you hammer each piece into the ground, interlocking it with the previous piece. Installation couldn't be simpler, and it's easy to make curves and stagger the top level for going up hills (something you cannot do easily with conventional edging).
Enough to make approximately 20' of installed edging. Comes with four 90° corner connectors and four T-connectors. Instructions included.
Made in USA.
Using a rubber mallet, hammer each piece into the ground and interlock it with the adjacent piece. No trench is needed. To make a curve, angle each piece slightly as you drive it in. For corners, use the included 90° connectors.
Each kit makes approximately 20' of installed edging. Multiple kits can be connected in series for longer runs.
Yes. Because the edging is made up of individual interlocking pieces rather than a continuous roll, the top level can be staggered from one piece to the next to follow a slope — something that is difficult to do with conventional roll-style edging.
Each kit includes four 90° corner connectors and four T-connectors for creating right-angle turns and T-junction layouts.
The Pound-In Edging is made in the USA.
| Materials | Heavy plastic |
| Dimensions | 6 1/4" wide × 5 1/2" high per piece |
| Includes | 20' of installed edging; four 90° corner connectors; four T-connectors; instructions |
| Country of Origin | USA |
| Package Quantity | 1 set |
| Color/Finish | Black |
Options:
Variations:
Pound-In Edging
The problem with installing conventional lawn edging is the necessity of digging a trench, laying it in, backfilling, etc. With this pound-in edging, installation is greatly simplified.
Each heavy-plastic interlocking piece measures 6 1/4" wide by 5 1/2" high. Using a rubber mallet, you hammer each piece into the ground, interlocking it with the previous piece. Installation couldn't be simpler, and it's easy to make curves and stagger the top level for going up hills (something you cannot do easily with conventional edging).
Enough to make approximately 20' of installed edging. Comes with four 90° corner connectors and four T-connectors. Instructions included.
Made in USA.
