00N1013 - 13mm Flanged Nut, 1/4-20 Quick-Connect
Choose an option to view item availability.
With no shoulder, these nuts can be bottomed out in a hole, or set below a surface. The tapered interrupted thread design ensures positive locking and good pull-out resistance. They can also be used for curved work, or when you want to set the nut deep to accommodate over-long bolts.
This style has a thin flange and is used for a flush fit — the flange prevents oversinking.
Die-cast from a zinc alloy. Require a 6mm hex key. Pre-drill size will vary from 8.7mm to 9.5mm, depending on the nut size and the material thickness and density.
Measurements for 13mm Nuts
L: 13mm
L1: 3.4mm
D1: 12.5mm
D2: 11.7mm
D3: 7.8mm
Measurements for 20mm Nuts
L: 20mm
L1: 3.4mm
D1: 12.5mm
D2: 12mm
D3: 7.5mm
Measurements for 25mm Nuts
L: 25mm
L1: 4mm
D1: 12.5mm
D2: 11.9mm
D3: 8mm
Options:
Length
Variations:
1/4-20 Quick-Connect Flanged Insert Nuts
With no shoulder, these nuts can be bottomed out in a hole, or set below a surface. The tapered interrupted thread design ensures positive locking and good pull-out resistance. They can also be used for curved work, or when you want to set the nut deep to accommodate over-long bolts.
This style has a thin flange and is used for a flush fit — the flange prevents oversinking.
Die-cast from a zinc alloy. Require a 6mm hex key. Pre-drill size will vary from 8.7mm to 9.5mm, depending on the nut size and the material thickness and density.
