00N1201 - Capped Insert Nut, 1/4-20 Quick-Connect
This item is not available for this region.
Used for through joints where the nut may be exposed, this nut has a closed end and is knocked into the pre-drilled hole.
The teeth hold the nut in place and prevent it from turning as the bolt is tightened.
The nut is die-cast from a zinc alloy. Pre-drill size will vary from 8.3mm to 8.7mm, depending on material thickness and density.
Options:
Variations:
1/4-20 Quick-Connect Capped Insert Nut
Used for through joints where the nut may be exposed, this nut has a closed end and is knocked into the pre-drilled hole.
The teeth hold the nut in place and prevent it from turning as the bolt is tightened.
The nut is die-cast from a zinc alloy. Pre-drill size will vary from 8.3mm to 8.7mm, depending on material thickness and density.
