To make the most of available space, these top-of-the-line sliding cabinet units have all-steel ball-bearing slides for quiet, smooth operation. Storage compartments have rigid, high-density fiber panel bottoms with an easy-to-clean, non-slip coating to help prevent stored items from shifting. Designed for ease of installation in a range of cabinet sizes, they are made of heavy-gauge steel wire (0.2" or 0.25" thick) with a tough epoxy coating in a matte silver-gray finish. Made in Italy, these are reliable storage units, built to last a lifetime.
These framed cabinet drawers have built-in slides that mount to the inside walls of the cabinet, allowing better access to stored items. Once installed, drawers can be disengaged from the slides for cleaning. A self-closing mechanism pulls the unit softly shut in the last few inches of travel to prevent slamming. Drawer rails are about 4"(10cm) high with a dropped front so it's easier to reach inside. All drawers are 44cm (17 1/2") deep with a total height of 14cm (5 1/2"), including slides. Minimum inside cabinet depth of 490mm (19 5/16") required. Comes with mounting screws and instructions.
- The 360mm wide drawer is for cabinets with an inside width of 412mm and an outside width of 450mm
- The 410mm wide drawer is for cabinets with an inside width of 462mm and an outside width of 500mm
- The 510mm wide drawer is for cabinets with an inside width of 562mm and an outside width of 600mm
- The 610mm wide drawer is for cabinets with an inside width of 662mm and an outside width of 700mm