Quantity:
Rated for wet or dry conditions, this 1.2-watt LED light can be used anywhere you can drill a through-hole. Using the required color controller, the light can be set to any hue from a near-endless spectrum (including variations of white). This allows you to be creative with your lighting. It produces a 45° beam of about 80 lumens at maximum brightness.
The light is easy to connect and install using standard wire and connectors. Each light comes pre-wired with an 8" wire lead for direct hardwire connections; lights can be installed individually or linked in sequence using standard electrical wire and connectors (available separately). While not required, you may want to add an on/off switch.
The light fits into a 1 3/8" hole when used in rigid materials (wood or plastic) and into a 1 1/4" hole when used in drywall, secured by integral spring clips. An optional ring nut is available separately for thinner applications such as panel board, fiberglass or sheet metal.
Each light requires an interchangeable trim ring that simply threads onto the light housing (available separately).
The lighting requires a 12V DC power supply with enough wattage to suit the intended application, some wiring and a color controller.
The long-life LEDs provide years of maintenance-free lighting. All components are CSA, cETLus or cUL listed. Installation instructions included.
Options:
Variations:
Indoor/Outdoor Color-Controlled (RGB) Mini Recessed LED Light
Rated for wet or dry conditions, this 1.2-watt LED light can be used anywhere you can drill a through-hole. Using the required color controller, the light can be set to any hue from a near-endless spectrum (including variations of white). This allows you to be creative with your lighting. It produces a 45° beam of about 80 lumens at maximum brightness.
The light is easy to connect and install using standard wire and connectors. Each light comes pre-wired with an 8" wire lead for direct hardwire connections; lights can be installed individually or linked in sequence using standard electrical wire and connectors (available separately). While not required, you may want to add an on/off switch.
The light fits into a 1 3/8" hole when used in rigid materials (wood or plastic) and into a 1 1/4" hole when used in drywall, secured by integral spring clips. An optional ring nut is available separately for thinner applications such as panel board, fiberglass or sheet metal.
Each light requires an interchangeable trim ring that simply threads onto the light housing (available separately).
The lighting requires a 12V DC power supply with enough wattage to suit the intended application, some wiring and a color controller.
The long-life LEDs provide years of maintenance-free lighting. All components are CSA, cETLus or cUL listed. Installation instructions included.
