05P8661 - Set of 2 Veritas Miniature Saws
These are fully functional 1:3-scale versions of two of our joinery saws. Like their full-size counterparts, each has a high-carbon steel blade, a molded spine and a walnut grip.
The blade of the rip tenon saw is just shy of 5 1/2" long, with an effective cutting depth of just over 1 1/4" and a nominal kerf width of 0.014". The 27 tpi ripping teeth have a 14° rake using the typical 60° included angle. The saw is 7" long overall.
The crosscut carcass saw has a 30 tpi blade that is 3 5/8" long, and has an effective cutting depth of 3/4" and a nominal kerf width of only 0.014". The teeth have a rake angle of 15° and a 60° included angle. The saw is 5 1/2" long overall.
Made in Canada.
WARNING: This product can expose you to chemicals including Wood dust, which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Set of 2 Veritas Miniature Saws
These are fully functional 1:3-scale versions of two of our joinery saws. Like their full-size counterparts, each has a high-carbon steel blade, a molded spine and a walnut grip.
The blade of the rip tenon saw is just shy of 5 1/2" long, with an effective cutting depth of just over 1 1/4" and a nominal kerf width of 0.014". The 27 tpi ripping teeth have a 14° rake using the typical 60° included angle. The saw is 7" long overall.
The crosscut carcass saw has a 30 tpi blade that is 3 5/8" long, and has an effective cutting depth of 3/4" and a nominal kerf width of only 0.014". The teeth have a rake angle of 15° and a 60° included angle. The saw is 5 1/2" long overall.
Made in Canada.
