Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
05H4112 - Veritas Clamp Rails
05H4112 - Veritas Clamp Rails
A wooden workpiece ready for gluing rests on a pipe clamp held in the Veritas clamp rail
One end of a parallel-jaw bar clamp is held in a narrow slot of a Veritas clamp rail

05H4112 - Veritas Clamp Rails

Veritas Clamp RailsMade in Canada

(0 Reviews)
Item 05H4112, Veritas Clamp Rails
  • Upright Clamp Support: Converts a table or benchtop into a clamping station that holds bar or pipe clamps upright and in position during glue-ups.
  • Dual Slot Widths: Alternating 3/8" slots fit parallel-jaw bar clamps while 1 3/32" slots accept 3/4" pipe clamps, so one rail set works with both clamp types.
  • Freestanding or Dog-Hole Mounted: Use the rails freestanding on a flat surface, or mount them in 3/4" or 20mm dog holes with the included platform saddles.
  • Baltic Birch Construction: 11/16"-thick Baltic birch plywood keeps the rails stable and flat under the load of loaded clamps.
More details
$36.50

Online: Loading...

Making sure all the clamps and pieces of a large project are correctly aligned for glue-up can be a challenge, especially for adhesives with short open times. This system simplifies the process by converting a table or bench top into a clamping station, holding clamps upright and in position so all you have to worry about is assembling the parts.

Each Baltic birch plywood rail is machined with alternating 3/8" wide slots for parallel-jaw bar clamps and 1 3/32" wide slots for 3/4" pipe clamps. The pair of 30" long rails provides a stable base for clamping wide projects, and the only limit on how far apart you place them is the reach of your clamps. The 11/16" thick rails can be used freestanding on any table top or, for improved stability, mounted in 3/4" or 20mm dog holes using the four included platform saddles.

A simple way to make glue-ups easier and more efficient. Made in Canada.

05H4112 - Veritas Clamp Rails

Options:

Variations:

  • 05H4112 - Veritas Clamp Rails
    1 - $36.50

Veritas Clamp Rails

Making sure all the clamps and pieces of a large project are correctly aligned for glue-up can be a challenge, especially for adhesives with short open times. This system simplifies the process by converting a table or bench top into a clamping station, holding clamps upright and in position so all you have to worry about is assembling the parts.

Each Baltic birch plywood rail is machined with alternating 3/8" wide slots for parallel-jaw bar clamps and 1 3/32" wide slots for 3/4" pipe clamps. The pair of 30" long rails provides a stable base for clamping wide projects, and the only limit on how far apart you place them is the reach of your clamps. The 11/16" thick rails can be used freestanding on any table top or, for improved stability, mounted in 3/4" or 20mm dog holes using the four included platform saddles.

A simple way to make glue-ups easier and more efficient. Made in Canada.