Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Setting the depth of cut for a router bit on a router table using the layout block
05N5821 - Imperial Layout Block, ea.
05N5820 - Imperial Layout Blocks, pkg. of 3
Using a layout block to set the blade of a router plane
Setting the distance between the blade and fence on a table saw using the layout block

Veritas Imperial Layout Block

Veritas Imperial Layout BlockMade in Canada

Item undefined, undefined

This item is not available for this region.

Conveniently pocket sized, this L-shaped gauge block simplifies machine set-up or layout by providing a direct reference for five common Imperial measurements. Changing the block orientation makes it simple to position between a fence and a bit or blade, allowing rapid and accurate adjustment using the 1/8", 1/4", 1/2" or 3/4" sections or the 1" overall length. The precision aluminum extrusion is also accurate enough to use with our set-up blocks.

A hole on one side lets you attach it to a key chain, and an etched rule with graduations in 32nds allows measurements up to one inch. Made in Canada.
Setting the depth of cut for a router bit on a router table using the layout block

Options:

Option

Variations:

    Veritas Imperial Layout Block

    Conveniently pocket sized, this L-shaped gauge block simplifies machine set-up or layout by providing a direct reference for five common Imperial measurements. Changing the block orientation makes it simple to position between a fence and a bit or blade, allowing rapid and accurate adjustment using the 1/8", 1/4", 1/2" or 3/4" sections or the 1" overall length. The precision aluminum extrusion is also accurate enough to use with our set-up blocks.

    A hole on one side lets you attach it to a key chain, and an etched rule with graduations in 32nds allows measurements up to one inch. Made in Canada.

    Related Products

    Registering a 1 1/2"" Pocket Layout Square against the edge of a workpiece while marking a cut line
    Using a Veritas 1 1/2"" Pocket Layout Square over a tape measure to strike a line on a workpiece
    Using a Veritas 1 1/2"" Pocket Layout Square to measure a small hinge leaf
    Using a 1 1/2"" Pocket Layout Square and a striking knife to mark out a hinge gain on a workpiece
    Using the protractor scale marked on a 1 1/2"" Pocket Layout Square to lay out an angled cut line
    Using the 1/4"" side of the 1 1/2"" Pocket Square’s base to mark out a mortise centered on 3/4"" stock
    A woodworker slips a Veritas 1 1/2"" Pocket Layout Square into the pocket of a workshop apron
    05N5410 - Veritas 1 1/2"" Pocket Layout Square
    05N5410 - Veritas 1 1/2"" Pocket Layout Square
    Veritas 1 1/2" Pocket Layout Square
    Product Information
    30N3200 - 6" Starrett Depth Gauge
    30N3201 - 150mm Starrett Depth Gauge
    30N3202 - 6" Starrett Depth/Angle Gauge
    30N3204 - 6" Starrett Depth/Angle Gauge with Hook Rule and Rod
    Starrett Depth/Angle Gauges
    Starrett Depth/Angle Gauges