60T0301 - Japanese Standard Dozuki Saw
Our most popular saw in the Japanese line is the dozuki. It can be used for tenons, dovetails and other joinery cuts.
The fine teeth (17 tpi) and the thin blade combine to give a very smooth cut. At the same time, it cuts more quickly than almost any conventional saw. The blade is only 0.011" thick and gives a kerf of 0.018". The tiny secondary bevels give the teeth strong tips that do not dull easily.
The 9 1/2" long blade has a short uncut portion on the tip that makes starting a cut easier. Maximum cut depth of about 2". 21" overall.
Options:
Variations:
Japanese Standard Dozuki Saw
Our most popular saw in the Japanese line is the dozuki. It can be used for tenons, dovetails and other joinery cuts.
The fine teeth (17 tpi) and the thin blade combine to give a very smooth cut. At the same time, it cuts more quickly than almost any conventional saw. The blade is only 0.011" thick and gives a kerf of 0.018". The tiny secondary bevels give the teeth strong tips that do not dull easily.
The 9 1/2" long blade has a short uncut portion on the tip that makes starting a cut easier. Maximum cut depth of about 2". 21" overall.
