25K6175 - Kreg 520 Pro Pocket-Hole Jig
From the latest generation of Kreg’s pocket-hole joinery system, this compact, portable jig lets you make strong pocket-hole joints in the workshop, on a jobsite or anywhere you happen to be working.
Its built-in pistol-grip clamp lets you position the jig one-handed, and an adjustment knob lets you control the clamping force to permit a firm hold without marring the work. With jaws that are lined with a non-slip material to prevent shifting in use, the quick-release clamp has a handle that rotates for clearance next to an adjacent surface.
Made from glass-reinforced nylon with a hardened steel drilling insert, the jig lets you center two holes 9/16", 7/8" or 1 7/16" apart, depending on material width. It comes with a 6 1/4" HSS stepped drill bit with a 3/16" diameter by 1/2" pilot, a 3/8" diameter counterbore, and a 1/4" hex shank that’s grooved for use in quick-change chucks. For easy, accurate depth settings, simply align a hole in the included depth collar with one of the engraved markings on the drill-bit shank, indicating the correct placement for 1/2", 3/4" and 1 1/2" thick material.
The kit also comes with a combination hex key and material-thickness gauge, a 6" #2 square-recess driver and sixty 1 1/4" pocket-hole screws.
WARNING: This product can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size), which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Kreg 520 Pro Pocket-Hole Jig
From the latest generation of Kreg’s pocket-hole joinery system, this compact, portable jig lets you make strong pocket-hole joints in the workshop, on a jobsite or anywhere you happen to be working.
Its built-in pistol-grip clamp lets you position the jig one-handed, and an adjustment knob lets you control the clamping force to permit a firm hold without marring the work. With jaws that are lined with a non-slip material to prevent shifting in use, the quick-release clamp has a handle that rotates for clearance next to an adjacent surface.
Made from glass-reinforced nylon with a hardened steel drilling insert, the jig lets you center two holes 9/16", 7/8" or 1 7/16" apart, depending on material width. It comes with a 6 1/4" HSS stepped drill bit with a 3/16" diameter by 1/2" pilot, a 3/8" diameter counterbore, and a 1/4" hex shank that’s grooved for use in quick-change chucks. For easy, accurate depth settings, simply align a hole in the included depth collar with one of the engraved markings on the drill-bit shank, indicating the correct placement for 1/2", 3/4" and 1 1/2" thick material.
The kit also comes with a combination hex key and material-thickness gauge, a 6" #2 square-recess driver and sixty 1 1/4" pocket-hole screws.
