Q: How do the support wings help with pocket-hole joinery?
The fold-out support wings steady large panels and sheet goods so they don't tip or wobble while you drill, and they detach in the same motion when you're working with smaller pieces.
25K6185 - Kreg 720 Pro Pocket-Hole Jig
From the latest generation of Kreg’s pocket-hole joinery system, this sturdy, versatile jig is quick to set up and easy to use, letting you make strong pocket-hole joints in a wide range of applications.
To hold the jig in position while you drill, its built-in lever-operated clamp can be operated one-handed and automatically adjusts for stock thicknesses from 1/2" to 1 1/2". The clamp jaws are lined with a non-slip material to prevent shifting in use, and an adjustment knob lets you control the clamping force to permit a firm hold without marring the work. Once set, it automatically maintains the same force regardless of stock thickness, so you can switch workpieces without making adjustments.
Made of glass-reinforced nylon with a steel core for strength, the drill guide block contains three hardened steel bushings that let you space two holes 9/16", 7/8" or 1 7/16" apart, depending on material width.
The jig comes with a 6 1/4" HSS stepped drill bit that has a 3/16" diameter by 1/2" pilot, a 3/8" diameter counterbore, and a 1/4" hex shank that’s grooved for use in quick-change chucks. For easy, accurate depth settings, simply align a hole in the supplied depth collar with one of the engraved markings on the drill-bit shank, indicating the correct placement for 1/2", 3/4" and 1 1/2" thick material.
For improved stability when working with sheet goods or other large stock, it also includes two sturdy stock-support wings that simply snap into place on either side of the jig and can be removed just as easily when not needed. The wings have a hinged lid that lets them double as storage boxes for other small accessories such as pocket-hole screws and drill bits. Sliding work stops, which travel on a 6" track marked in 1/8" increments on the top of each support wing, can be locked in position to ensure precise, repeatable hole placement up to 8 3/4" from the edge of a workpiece.
An included snap-in shroud connects directly to a 1 1/4" vacuum hose and comes with an adapter for connection to a 1-7/8" or 2 1/2" hose for easy debris clearance, with a pivoting outlet that lets you orient the hose to avoid obstruction. The jig also comes with a table clamp that can be used to secure the jig to a workbench or other work surface, a combination hex key and material-thickness gauge, two #2 square-recess drivers (6" and 3" long), and 160 pocket-hole screws (one hundred 1 1/4" screws and sixty 2 1/2" screws).
The fold-out support wings steady large panels and sheet goods so they don't tip or wobble while you drill, and they detach in the same motion when you're working with smaller pieces.
The stops travel along a track marked in 1/8 inch increments and lock in place up to 8 3/4 inches from the edge of the workpiece, so repeat holes land in exactly the same spot.
Yes, an included table clamp lets you secure it directly to a workbench or other work surface for added stability.
The 720 Pro adds fold-out support wings with sliding stops, a table clamp and a second square-recess driver, giving it more capability for larger panels than the standard 720.
Yes, each wing has a hinged lid that doubles as a small storage box for pocket-hole screws, drill bits and other small parts.
| Materials | Glass-reinforced nylon body with steel core; HSS drill bit; hardened steel bushings |
| Package Quantity | 1 kit |
| Compatibility | Fits a workbench edge via the included table clamp |
| Compatibility Dimensions | Adjustable to center pocket holes 9/16", 7/8" or 1 7/16" apart depending on material width; connects to 1 1/4" vacuum hose directly, or 1 7/8"/2 1/2" hose with included adapter |
| Includes | Pocket-hole jig; stepped drill bit; depth collar; stock-support wings; table clamp; hex key and material-thickness gauge; two square-recess drivers; pocket-hole screws; dust shroud with hose adapter |
| Capacity | Automatically clamps material 1/2" to 1 1/2" thick; sliding stops lock up to 8 3/4" from the workpiece edge |
| Warranty | Lee Valley Satisfaction Guarantee |
WARNING: This product can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size), which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Kreg 720 Pro Pocket-Hole Jig
From the latest generation of Kreg’s pocket-hole joinery system, this sturdy, versatile jig is quick to set up and easy to use, letting you make strong pocket-hole joints in a wide range of applications.
To hold the jig in position while you drill, its built-in lever-operated clamp can be operated one-handed and automatically adjusts for stock thicknesses from 1/2" to 1 1/2". The clamp jaws are lined with a non-slip material to prevent shifting in use, and an adjustment knob lets you control the clamping force to permit a firm hold without marring the work. Once set, it automatically maintains the same force regardless of stock thickness, so you can switch workpieces without making adjustments.
Made of glass-reinforced nylon with a steel core for strength, the drill guide block contains three hardened steel bushings that let you space two holes 9/16", 7/8" or 1 7/16" apart, depending on material width.
The jig comes with a 6 1/4" HSS stepped drill bit that has a 3/16" diameter by 1/2" pilot, a 3/8" diameter counterbore, and a 1/4" hex shank that’s grooved for use in quick-change chucks. For easy, accurate depth settings, simply align a hole in the supplied depth collar with one of the engraved markings on the drill-bit shank, indicating the correct placement for 1/2", 3/4" and 1 1/2" thick material.
For improved stability when working with sheet goods or other large stock, it also includes two sturdy stock-support wings that simply snap into place on either side of the jig and can be removed just as easily when not needed. The wings have a hinged lid that lets them double as storage boxes for other small accessories such as pocket-hole screws and drill bits. Sliding work stops, which travel on a 6" track marked in 1/8" increments on the top of each support wing, can be locked in position to ensure precise, repeatable hole placement up to 8 3/4" from the edge of a workpiece.
An included snap-in shroud connects directly to a 1 1/4" vacuum hose and comes with an adapter for connection to a 1-7/8" or 2 1/2" hose for easy debris clearance, with a pivoting outlet that lets you orient the hose to avoid obstruction. The jig also comes with a table clamp that can be used to secure the jig to a workbench or other work surface, a combination hex key and material-thickness gauge, two #2 square-recess drivers (6" and 3" long), and 160 pocket-hole screws (one hundred 1 1/4" screws and sixty 2 1/2" screws).
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
