09A0522 - Fret-Saw Table
This substantial fret-saw table provides rigid support close to the cut, while the tapered bird's-mouth slot and central hole permit the needed blade clearance.
Unlike traditional designs, ours adds an 8 1/4" tall vertical board so you can hold it in a bench vise instead of having to clamp it to a surface. This also allows you to raise the table above the height of your bench to work from a more comfortable position.
Made of good-quality 18mm thick birch plywood, it has a 6" diameter table top supported by a gusset for strength and rigidity. Minor assembly required (wood screws included).
WARNING: This product can expose you to chemicals including Formaldehyde (gas), which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Fret-Saw Table
This substantial fret-saw table provides rigid support close to the cut, while the tapered bird's-mouth slot and central hole permit the needed blade clearance.
Unlike traditional designs, ours adds an 8 1/4" tall vertical board so you can hold it in a bench vise instead of having to clamp it to a surface. This also allows you to raise the table above the height of your bench to work from a more comfortable position.
Made of good-quality 18mm thick birch plywood, it has a 6" diameter table top supported by a gusset for strength and rigidity. Minor assembly required (wood screws included).
