This fence kit lets you construct a shooting board that doesn’t limit you to one angle – the fence is adjustable to let you easily shoot miters of various angles. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly adjust the fence to shoot square angles as well as miters for frames with ten, eight, seven, six, five, four or three sides. For angles in between, the fence locks in place with a gyratory handle.
The fence is cast from a strong zinc-aluminum alloy, with steel and brass fittings. It is easily installed on a user-made shooting board in a right- or left-hand configuration, using the included mounting hardware. A slot in the fence face accepts an adjustable user-made wooden sacrificial extension, which helps prevent grain blow-out by supporting stock from behind.