Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Using a flame-shaped Kutzall rotary carving burr to sculpt the neck contours of a duck carving
99W6211 - Set of 4 Kutzall Rotary Carving Burrs
A close-up of the four rotary carving burrs, showing the flame, taper, sphere and ball-nose profiles
99W6211 - Set of 4 Kutzall Rotary Carving Burrs
Using a flame-shaped Kutzall rotary carving burr to sculpt the neck contours of a duck carving
99W6211 - Set of 4 Kutzall Rotary Carving Burrs
A close-up of the four rotary carving burrs, showing the flame, taper, sphere and ball-nose profiles
99W6211 - Set of 4 Kutzall Rotary Carving Burrs

Set of 4 Kutzall Rotary Carving Burrs

This item is not available for this region.

Special buy. Limited stock.

These are outstanding power-carving burrs for use on softwood, hardwood, plastic and composites, offered in a versatile set of four of the most commonly used profiles.

Made of highly durable tungsten carbide to stay sharp through extended use, the aggressive teeth are evenly spaced and set at a consistent height, so they remove stock quickly yet leave a surprisingly smooth surface.

The flame, taper, sphere and ball-nose burrs measure 1 1/2" to 1 3/4" long, with 1/8" diameter steel shanks and heads ranging from about 1/2" to just over 1" in length and about 1/4" to 1/2" in diameter.

Made in the USA, these are long-lasting, premium-quality burrs at an excellent price.

Using a flame-shaped Kutzall rotary carving burr to sculpt the neck contours of a duck carving

Options:

Variations:

    Set of 4 Kutzall Rotary Carving Burrs

    Special buy. Limited stock.

    These are outstanding power-carving burrs for use on softwood, hardwood, plastic and composites, offered in a versatile set of four of the most commonly used profiles.

    Made of highly durable tungsten carbide to stay sharp through extended use, the aggressive teeth are evenly spaced and set at a consistent height, so they remove stock quickly yet leave a surprisingly smooth surface.

    The flame, taper, sphere and ball-nose burrs measure 1 1/2" to 1 3/4" long, with 1/8" diameter steel shanks and heads ranging from about 1/2" to just over 1" in length and about 1/4" to 1/2" in diameter.

    Made in the USA, these are long-lasting, premium-quality burrs at an excellent price.

    Related Products

    17J2001 - Industrial Burr Set of 30
    Industrial Diamond Burr Set of 30
    Product Information
    05J6503 - Fence and Center Kit
    Using the curve guides attached to the fence to rout a profile on a curved surface
    Using the Fence and Center Kit to cut a circle from large board
    Using the Fence and Center Kit to rout a groove around a circular workpiece