Skip to contentAccessibility Statement

No Tariffs. No Hidden Fees.

ITEM ADDED TO YOUR CART ()
logologoCart
Cart
14J0325 - Set of Five 82° HSS Countersinks
14J0325 - Set of Five 82° HSS Countersinks

14J0325 - Set of Five 82° HSS Countersinks

Set of Five 82° HSS Countersinks

(0 Reviews)
Item 14J0325, Set of Five 82° HSS Countersinks
  • Matched Countersink Angle: 82° points match the head profile of standard flat-head and oval-head screws for a clean, gap-free fit.
  • Three-Flute Cutting: Three flutes cut cleanly with minimal chatter in hardwood, plastic, brass and other non-ferrous metals.
  • Five Sizes Included: Diameters from 3/16" to 1/2" cover countersinking for #2 to #12 screws.
  • Quick-Change Compatible: 1/4" hex shanks fit quick-change drill chucks and 1/4" driver adapters.
  • Deburring Bonus: Use them to remove the burr left when drilling metal, chamfering the hole edge slightly.
More details
$17.50

Online: Loading...
Set of 4 Narex Richter Butt Chisels
Shop More Special Buys

With 82° points to match the head profile of standard flat-head and oval-head screws, these three-flute countersinks cut cleanly with minimal chatter. The set includes 3/16", 1/4", 5/16", 3/8" and 1/2" diameter bits for countersinking #2 to #12 screws in hardwood, plastic, brass or other non-ferrous metals.

They are particularly useful for ensuring you have a neat, gap-free fit for whichever screws you have at hand. They can also be used to remove the burr left when drilling metal, slightly chamfering the edge of the hole. All have 1/4" hex shanks, compatible with quick-change drill chucks and 1/4" driver adapters.

Excellent value. Available while quantities last.

14J0325 - Set of Five 82° HSS Countersinks

Options:

Variations:

  • 14J0325 - Set of Five 82° HSS Countersinks
    1 - $17.50

Set of Five 82° HSS Countersinks


With 82° points to match the head profile of standard flat-head and oval-head screws, these three-flute countersinks cut cleanly with minimal chatter. The set includes 3/16", 1/4", 5/16", 3/8" and 1/2" diameter bits for countersinking #2 to #12 screws in hardwood, plastic, brass or other non-ferrous metals.

They are particularly useful for ensuring you have a neat, gap-free fit for whichever screws you have at hand. They can also be used to remove the burr left when drilling metal, slightly chamfering the edge of the hole. All have 1/4" hex shanks, compatible with quick-change drill chucks and 1/4" driver adapters.

Excellent value. Available while quantities last.

Related Products

A board with a hole drilled in it, with a pocket drilling guide on top and a drill beside it
Using a drill and a pocket drilling guide to drill a hole near the corner of a wooden board
Using a pocket drilling guide to keep the bit correctly positioned when starting to drill a hole
A drill bit registered in the V-notch of a pocket drilling guide, seen from above
A woodworker slips a pocket drilling guide into the pocket of a workshop apron
15J7401 - Pocket Drilling Guide
Pocket Drilling Guide

$19.50

Choose an option to view item availability.

Product Information
Holding a drill bit against the drill stop gauge while tightening the drill stop hex key
05N7701 - Veritas Drill Stop Gauge
Veritas Drill Stop Gauge

$9.50

Choose an option to view item availability.

Product Information
A magnetized screwdriver holds a screw, with others held to a magnetizer/demagnetizer on its shank
A screwdriver magnetizer/demagnetizer shown next to a magnetized screwdriver holding a screw
44K1250 - Screwdriver Magnetizer/Demagnetizer
Screwdriver Magnetizer/Demagnetizer

$7.90

Choose an option to view item availability.

Product Information