86N6003 - Incra Miter 3000SE Gauge
Known for accuracy, ease of use, and sturdy construction, an Incra miter gauge is an excellent upgrade for any table saw.
The 3000SE is Incra’s largest-capacity gauge. While the 1000SE has stops every 5°, this gauge indexes in 0.5° increments over its 180° range. It also has a much longer fence at 27" (extendable to 48 1/2").
The protractor head has a patented indexing system for quick, positive adjustment. A vernier scale provides precise adjustment to 6 minutes (1/10°). The extruded aluminum fence has a T-track to mount a sub-fence, and an integral scale for direct reading. Adjustable expansion discs in the 3/8" × 3/4" table bars provide low-friction travel and remove lateral play within the miter slot.
A micro-adjust stop allows repeatable cuts, and has dual flip arms that are used together or independently for different set-ups. The flip arms interlock with the fence to prevent lifting by a mitered workpiece. Reversible for use either side of the saw blade, this is an accurate and versatile table-saw accessory.
Usable right or left of the saw blade, this is an excellent gauge for larger table saws or those with a table extension.
Made in the USA from plated heavy-gauge steel and aluminum. The angular accuracy is 1/50 of a degree. A hex tool is included for adjustments.
Not available for shipment to Québec.
WARNING: This product can expose you to chemicals including Wood dust, which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Incra 3000SE Miter Gauge
Known for accuracy, ease of use, and sturdy construction, an Incra miter gauge is an excellent upgrade for any table saw.
The 3000SE is Incra’s largest-capacity gauge. While the 1000SE has stops every 5°, this gauge indexes in 0.5° increments over its 180° range. It also has a much longer fence at 27" (extendable to 48 1/2").
The protractor head has a patented indexing system for quick, positive adjustment. A vernier scale provides precise adjustment to 6 minutes (1/10°). The extruded aluminum fence has a T-track to mount a sub-fence, and an integral scale for direct reading. Adjustable expansion discs in the 3/8" × 3/4" table bars provide low-friction travel and remove lateral play within the miter slot.
A micro-adjust stop allows repeatable cuts, and has dual flip arms that are used together or independently for different set-ups. The flip arms interlock with the fence to prevent lifting by a mitered workpiece. Reversible for use either side of the saw blade, this is an accurate and versatile table-saw accessory.
Usable right or left of the saw blade, this is an excellent gauge for larger table saws or those with a table extension.
Made in the USA from plated heavy-gauge steel and aluminum. The angular accuracy is 1/50 of a degree. A hex tool is included for adjustments.
Not available for shipment to Québec.
Choose an option to view item availability.
Choose an option to view item availability.
Item No Longer Available.
Choose an option to view item availability.
