Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
95T2254 - SawStop Scale Miter Gauge
A SawStop scale miter gauge mounted in the miter slot of a table saw
A view of the dual-armed stop block mounted on the fence of a SawStop scale miter gauge
A SawStop scale miter gauge with the fence extended, mounted in the miter slot of a table saw
The steel slider bar of a SawStop scale miter gauge mounted in the miter slot of a table saw
95T2254 - SawStop Scale Miter Gauge
95T2254 - SawStop Scale Miter Gauge
A SawStop scale miter gauge mounted in the miter slot of a table saw
A view of the dual-armed stop block mounted on the fence of a SawStop scale miter gauge
A SawStop scale miter gauge with the fence extended, mounted in the miter slot of a table saw
The steel slider bar of a SawStop scale miter gauge mounted in the miter slot of a table saw
95T2254 - SawStop Scale Miter Gauge

SawStop Scale Miter Gauge

This item is not available for this region.

To allow quick, positive adjustment, this miter gauge uses an indexing pin that registers in a series of notches arranged around the outer edge of the steel protractor head in 1° increments. A vernier scale permits further micro-adjustment in 1/10° increments. The indexing pin can also be disengaged to permit free rotation of the protractor.

The 18 1/4" extruded aluminum fence, which extends to 31", has a T-track to mount a sacrificial sub-fence up to 3/4" thick, and an integral scale for direct reading. Adjustable expansion discs in the 3/8" × 3/4" steel slider bar provide low-friction travel and remove lateral play within the miter slot.

For accurate repeat cuts, the stop has dual flip-down arms (adjustable in 1/32" increments) that let you switch between two different cut lengths within 4" of each other without having to reset the stop position.

A hex key is included for adjustments.

Easy to set up and use, this is a practical, accurate miter gauge.

SawStop Scale Miter Gauge
Item #: 95T2254
SawStop Model #: TSA-SMG

95T2254 - SawStop Scale Miter Gauge

Options:

Variations:

    SawStop Scale Miter Gauge

    To allow quick, positive adjustment, this miter gauge uses an indexing pin that registers in a series of notches arranged around the outer edge of the steel protractor head in 1° increments. A vernier scale permits further micro-adjustment in 1/10° increments. The indexing pin can also be disengaged to permit free rotation of the protractor.

    The 18 1/4" extruded aluminum fence, which extends to 31", has a T-track to mount a sacrificial sub-fence up to 3/4" thick, and an integral scale for direct reading. Adjustable expansion discs in the 3/8" × 3/4" steel slider bar provide low-friction travel and remove lateral play within the miter slot.

    For accurate repeat cuts, the stop has dual flip-down arms (adjustable in 1/32" increments) that let you switch between two different cut lengths within 4" of each other without having to reset the stop position.

    A hex key is included for adjustments.

    Easy to set up and use, this is a practical, accurate miter gauge.

    SawStop Scale Miter Gauge
    Item #: 95T2254
    SawStop Model #: TSA-SMG