05K3412 - Veritas Single Flush-Cut Saw & Set of 3 Imperial Snug-Plug Cutters
We offer our set of three Snug-Plug cutters (1/4", 3/8", 1/2") with our single-edge flush-cutting saw at a discount.
It is always difficult to fit plugs perfectly; any slight runout in the drill-press quill can make holes oversize, while also making plugs undersize. Snug-Plug cutters form slightly tapered plugs; the first 1/8” of the plug is the stated size, and the rest flares at a 3° angle. Unlike regular plug cutters, they shave the plug sides as they cut, making very smooth plugs. Just tap a plug into a hole until you meet resistance, then trim the excess. The plug fits perfectly, with a nearly invisible line between plug and workpiece. The cutters are carefully reamed after hardening for perfect concentricity. 3/8" shanks. Patented. Resharpening instructions included.
The saw has a thin, flexible 26 tpi blade that can be pressed flat against a surface, cutting the projection flush without marking the work. The Japanese tooth-pattern blade cuts aggressively on the pull stroke. The teeth have no set and can be used in a right- or left-handed orientation. With no tendency to drift in a cut, it can also be used for other fine-cutting applications. The saw is about 11 1/2" long with a 4 3/4" blade.
This set will quickly become indispensable in the shop.
WARNING: This product can expose you to chemicals including Wood Dust, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
Veritas Snug-Plug Cutters & Single-Edge Flush-Cutting Saw Set
We offer our set of three Snug-Plug cutters (1/4", 3/8", 1/2") with our single-edge flush-cutting saw at a discount.
It is always difficult to fit plugs perfectly; any slight runout in the drill-press quill can make holes oversize, while also making plugs undersize. Snug-Plug cutters form slightly tapered plugs; the first 1/8” of the plug is the stated size, and the rest flares at a 3° angle. Unlike regular plug cutters, they shave the plug sides as they cut, making very smooth plugs. Just tap a plug into a hole until you meet resistance, then trim the excess. The plug fits perfectly, with a nearly invisible line between plug and workpiece. The cutters are carefully reamed after hardening for perfect concentricity. 3/8" shanks. Patented. Resharpening instructions included.
The saw has a thin, flexible 26 tpi blade that can be pressed flat against a surface, cutting the projection flush without marking the work. The Japanese tooth-pattern blade cuts aggressively on the pull stroke. The teeth have no set and can be used in a right- or left-handed orientation. With no tendency to drift in a cut, it can also be used for other fine-cutting applications. The saw is about 11 1/2" long with a 4 3/4" blade.
This set will quickly become indispensable in the shop.
