25U0330 - 3M Binding Tape
Used by guitar makers for holding the edge-banding strips that surround the top and back of an instrument while the glue sets, this tape is convenient for a much wider range of tasks.
It is similar to conventional masking tape, but has slightly greater strength and stretchiness, and a natural rubber adhesive with better holding power. These properties make it a practical alternative when gluing small, delicate projects, or shapes that are tricky to clamp.
You can pull a joint tight, applying considerable tension before tacking the tape down; it holds the tension well, staying stuck tenaciously until you are ready to remove it. The tape peels off neatly without lifting finishes or leaving sticky residue behind.
Comes in a 19mm × 55m (3/4" × 180') roll.
Great stuff, made in Canada.
WARNING: This product can expose you to chemicals including Phthalates, which is known to the State of California to cause Both. For more information, go to www.P65Warnings.ca.gov (opens in new tab).
Options:
Variations:
3M Binding Tape
Used by guitar makers for holding the edge-banding strips that surround the top and back of an instrument while the glue sets, this tape is convenient for a much wider range of tasks.
It is similar to conventional masking tape, but has slightly greater strength and stretchiness, and a natural rubber adhesive with better holding power. These properties make it a practical alternative when gluing small, delicate projects, or shapes that are tricky to clamp.
You can pull a joint tight, applying considerable tension before tacking the tape down; it holds the tension well, staying stuck tenaciously until you are ready to remove it. The tape peels off neatly without lifting finishes or leaving sticky residue behind.
Comes in a 19mm × 55m (3/4" × 180') roll.
Great stuff, made in Canada.
