Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
03A0304 - Sjöbergs Tool Clamp
The tool clamp in a vise holding a square board as its edge is being planed
A saw held in the tool clamp as its teeth are sharpened
03A0304 - Sjöbergs Tool Clamp
03A0304 - Sjöbergs Tool Clamp
The tool clamp in a vise holding a square board as its edge is being planed
A saw held in the tool clamp as its teeth are sharpened
03A0304 - Sjöbergs Tool Clamp

Sjöbergs Tool Clamp

This item is not available for this region.

This tool clamp works in conjunction with your workbench vise to provide extra height when you want to raise the working height of a piece, such as when sharpening your saw or when you require additional clamping depth from your vise.

Made from lacquered birch, it has a non-slip abrasive surface on the jaw faces to prevent your workpiece from slipping.

Measures 12 3/8" long by 4 15/16" wide and provides an additional 6 1/4" of clamping depth.

A real helper in the workshop.

Made in Sweden.

03A0304 - Sjöbergs Tool Clamp

Options:

Variations:

    Sjöbergs Tool Clamp

    This tool clamp works in conjunction with your workbench vise to provide extra height when you want to raise the working height of a piece, such as when sharpening your saw or when you require additional clamping depth from your vise.

    Made from lacquered birch, it has a non-slip abrasive surface on the jaw faces to prevent your workpiece from slipping.

    Measures 12 3/8" long by 4 15/16" wide and provides an additional 6 1/4" of clamping depth.

    A real helper in the workshop.

    Made in Sweden.

    Related Products

    Using an Accu-Burr handled burnisher to roll 15° hooks on the edge of a scraper held in a vise
    Using an Accu-Burr handled burnisher to roll 15° hooks on the concave edge of a scraper clamped in a vise
    A close-up view of an Accu-Burr handled burnisher rolling 15° hooks on the edge of a scraper
    A diagram showing the 5°, 10° and 15° V-shaped grooves on an Accu-Burr burnisher
    70M2102 - Accu-Burr Handled Burnisher
    70M2102 - Accu-Burr Handled Burnisher
    Accu-Burr Handled Burnisher
    Product Information
    Sharpening saw teeth with a 5" double Extra-Slim Taper File
    62W3312 - 5" Dbl. Extra-Slim Taper File (11 to 14 tpi)
    62W3308 - 6" Dbl. Extra-Slim Taper File (9 to 10 tpi)
    Bahco Double Extra-Slim Saw-Sharpening Files