Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
A Bessey 5 1/2" medium-duty FA clamp clamping a piece of wood to a workbench
Closer view of Bessey 5 1/2" medium-duty FA clamp jaws
17F3312 - Bessey 12" × 5 1/2" Medium-Duty FA Clamp
17F3318 - Bessey 18" × 5 1/2" Medium-Duty FA Clamp
17F3324 - Bessey 24" × 5 1/2" Medium-Duty FA Clamp
A Bessey 5 1/2" medium-duty FA clamp clamping a piece of wood to a workbench
Closer view of Bessey 5 1/2" medium-duty FA clamp jaws
17F3312 - Bessey 12" × 5 1/2" Medium-Duty FA Clamp
17F3318 - Bessey 18" × 5 1/2" Medium-Duty FA Clamp
17F3324 - Bessey 24" × 5 1/2" Medium-Duty FA Clamp

Bessey 5 1/2" Jaw Medium-Duty Fast-Acting Clamps

This item is not available for this region.

Fast-acting bar clamps can deal with 90% of the clamping jobs around the shop; these medium-duty clamps have a classic design with a few improvements that stand out from other clamps on the market.

The steel bar has a profile similar to an I-beam, increasing its rigidity and resistance to twisting forces. The bar is serrated on both edges, with three facets on each side to increase the gripping area for the movable jaw. For complete assurance that the moving jaw won’t slip, you can tighten a set screw to lock it in place on the bar. The synthetic handle won’t loosen in changing humidity and has rubber sections that allow a good grip. To prevent the jaws from marring your work, they come with removable plastic pads.

Made with tough malleable cast-iron jaws and an Acme-cut screw, these clamps can apply up to 1320 lb of clamping force. They have a 5 1/2" jaw depth and a 1 1/4" face width, with a 3/8" thick by 1 1/4" wide bar.

A Bessey 5 1/2" medium-duty FA clamp clamping a piece of wood to a workbench

Options:

Length

Variations:

    Bessey 5 1/2" Jaw Medium-Duty Fast-Acting Clamps

    Fast-acting bar clamps can deal with 90% of the clamping jobs around the shop; these medium-duty clamps have a classic design with a few improvements that stand out from other clamps on the market.

    The steel bar has a profile similar to an I-beam, increasing its rigidity and resistance to twisting forces. The bar is serrated on both edges, with three facets on each side to increase the gripping area for the movable jaw. For complete assurance that the moving jaw won’t slip, you can tighten a set screw to lock it in place on the bar. The synthetic handle won’t loosen in changing humidity and has rubber sections that allow a good grip. To prevent the jaws from marring your work, they come with removable plastic pads.

    Made with tough malleable cast-iron jaws and an Acme-cut screw, these clamps can apply up to 1320 lb of clamping force. They have a 5 1/2" jaw depth and a 1 1/4" face width, with a 3/8" thick by 1 1/4" wide bar.