Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Bessey 4” light-duty FA clamps used to clamp a piece of wood to a workbench
Closer view of Bessey 4” light-duty FA clamp jaws
17F3108 - Bessey 8" × 4" Light-Duty FA Clamp
17F3112 - Bessey 12" × 4" Light-Duty FA Clamp
17F3116 - Bessey 16" × 4" Light-Duty FA Clamp
17F3124 - Bessey 24" × 4" Light-Duty FA Clamp
Bessey 4” light-duty FA clamps used to clamp a piece of wood to a workbench
Closer view of Bessey 4” light-duty FA clamp jaws
17F3108 - Bessey 8" × 4" Light-Duty FA Clamp
17F3112 - Bessey 12" × 4" Light-Duty FA Clamp
17F3116 - Bessey 16" × 4" Light-Duty FA Clamp
17F3124 - Bessey 24" × 4" Light-Duty FA Clamp

Bessey 4" Jaw Light-Duty Fast-Acting Clamps

This item is not available for this region.

Fast-acting bar clamps can deal with 90% of the clamping jobs around the shop; these light-duty clamps have a classic design with a few improvements that stand out from other clamps on the market.

The 1/4" thick by 1" wide steel bar has a profile similar to an I-beam, increasing its rigidity and resistance to twisting forces. For complete assurance that the movable jaw won’t slip, you can tighten a set screw to grip serrations on the bar, locking it in place. The synthetic handle won’t loosen in changing humidity and has rubbers sections that allow a good grip. To prevent the jaws from marring your work, they come with removable plastic pads.

Made with tough malleable cast-iron jaws and an Acme-cut screw, the clamp can apply up to 800 lb of clamping force. They have a 4" jaw depth and a 1 3/16" face width.

Bessey 4” light-duty FA clamps used to clamp a piece of wood to a workbench

Options:

Length

Variations:

    Bessey 4" Jaw Light-Duty Fast-Acting Clamps

    Fast-acting bar clamps can deal with 90% of the clamping jobs around the shop; these light-duty clamps have a classic design with a few improvements that stand out from other clamps on the market.

    The 1/4" thick by 1" wide steel bar has a profile similar to an I-beam, increasing its rigidity and resistance to twisting forces. For complete assurance that the movable jaw won’t slip, you can tighten a set screw to grip serrations on the bar, locking it in place. The synthetic handle won’t loosen in changing humidity and has rubbers sections that allow a good grip. To prevent the jaws from marring your work, they come with removable plastic pads.

    Made with tough malleable cast-iron jaws and an Acme-cut screw, the clamp can apply up to 800 lb of clamping force. They have a 4" jaw depth and a 1 3/16" face width.

    Related Products

    05H4112 - Veritas Clamp Rails
    05H4112 - Veritas Clamp Rails
    A wooden workpiece ready for gluing rests on a pipe clamp held in the Veritas clamp rail
    One end of a parallel-jaw bar clamp is held in a narrow slot of a Veritas clamp rail
    Veritas Clamp Rails
    Product Information