Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
VS3601 - Veritas Double-Edge Flush-Cutting Saw – Manufacturing Second
VS3601 - Veritas Double-Edge Flush-Cutting Saw – Manufacturing Second

Veritas Double-Edge Flush-Cutting Saw – Manufacturing SecondMade in Canada

This item is not available for this region.

Veritas Seconds Event – and More
One Day – Online Only – Limited Stock

About Veritas seconds: this stock of our double-edge flush-cutting saw (05K3601) has some minor cosmetic flaw on the handle or spine, or there is a gap between the spine and handle; performance of the saw is not affected. Quantities of seconds are limited and expected to sell out quickly.

Traditionally used for the rapid trimming of plugs and dowels flush with a surface, our flush-cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only.

The 22 tpi Japanese tooth pattern blade cuts aggressively (on the pull stroke) but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control.

About 11 1/2" long with 4 3/4" of blade, in a double-edged style that cuts from either side. Works like a charm.

Made in Canada.

VS3601 - Veritas Double-Edge Flush-Cutting Saw – Manufacturing Second

Options:

Variations:

    Veritas Double-Edge Flush-Cutting Saw – Manufacturing Second

    Veritas Seconds Event – and More
    One Day – Online Only – Limited Stock

    About Veritas seconds: this stock of our double-edge flush-cutting saw (05K3601) has some minor cosmetic flaw on the handle or spine, or there is a gap between the spine and handle; performance of the saw is not affected. Quantities of seconds are limited and expected to sell out quickly.

    Traditionally used for the rapid trimming of plugs and dowels flush with a surface, our flush-cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only.

    The 22 tpi Japanese tooth pattern blade cuts aggressively (on the pull stroke) but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control.

    About 11 1/2" long with 4 3/4" of blade, in a double-edged style that cuts from either side. Works like a charm.

    Made in Canada.

    Related Products

    VS3410 - Veritas Detail Flush-Cutting Saw – Manufacturing Second
    Veritas Detail Flush-Cutting Saw – Manufacturing Second
    Product Information