41M0101 - HORL 3 Cruise Rolling Knife Sharpener
_Best_Bet.jpg%3Fbranch%3Dproduction&w=384&q=75)
The HORL 3 Cruise offers a straightforward and reliable way to sharpen kitchen knives without having to control the bevel angle by hand.
The knife is held stationary against one of the two magnetic faces of the supplied angle support. You then roll the cylindrical sharpener along the edge, allowing its abrasive disc to follow the blade at a consistent angle. One face of the support holds the knife at 15° for a fine cutting edge; the opposite face provides a more robust 20° bevel.
A permanently fitted diamond disc uses durable monocrystalline diamond abrasive that retains its cutting action on kitchen-knife steels across a broad range of hardnesses, efficiently establishing or renewing the bevel.
The support has cushioned magnetic faces that grip the blade firmly without direct contact against the hard body of the guide. Four non-slip feet keep it stable on a smooth countertop.
Both the sharpener and support are made from a dense, rigid material produced using recycled ocean-bound plastic. Compact enough to keep close at hand, the roller measures 3 1/4" long by 2 1/8" in diameter, and the support measures 4 1/2" long by 2 1/4" wide by 1" high.
A well-made entry point to the HORL system, it provides the essential advantages of controlled angle sharpening in an elegant, easy-to-use form.
Made in Germany.
Options:
Variations:
HORL 3 Cruise Rolling Knife Sharpener
The HORL 3 Cruise offers a straightforward and reliable way to sharpen kitchen knives without having to control the bevel angle by hand.
The knife is held stationary against one of the two magnetic faces of the supplied angle support. You then roll the cylindrical sharpener along the edge, allowing its abrasive disc to follow the blade at a consistent angle. One face of the support holds the knife at 15° for a fine cutting edge; the opposite face provides a more robust 20° bevel.
A permanently fitted diamond disc uses durable monocrystalline diamond abrasive that retains its cutting action on kitchen-knife steels across a broad range of hardnesses, efficiently establishing or renewing the bevel.
The support has cushioned magnetic faces that grip the blade firmly without direct contact against the hard body of the guide. Four non-slip feet keep it stable on a smooth countertop.
Both the sharpener and support are made from a dense, rigid material produced using recycled ocean-bound plastic. Compact enough to keep close at hand, the roller measures 3 1/4" long by 2 1/8" in diameter, and the support measures 4 1/2" long by 2 1/4" wide by 1" high.
A well-made entry point to the HORL system, it provides the essential advantages of controlled angle sharpening in an elegant, easy-to-use form.
Made in Germany.
